module_phy_driver(ytphy_drvs) ->phy_module_driver ->phy_module_init ->phy_drivers_register ->phy_driver_register--将ytphy_drvs注册到MDIO总线上。 当读取到的ID匹配后,phy_device和phy_driver就关联上了。对phy_device的操作,就可以调用
1. init_module: 将一个新模块插入到内核中,用户空间工具只需要提供二进制数据,所有其他工作(特别是重定位和解决引用)由内核自身完成2. delete_module: 从内核移除一个模块(前提是该模块的代码不再使用,并且其他模块也不再使用该模块导出的函数,否则强行卸载会造成内核地址引用错误PANIC)3. reque_module(非系统调用...
移植linux之petalinux 之前一篇博文中,提到了一种通用的传统移植方式,将linux移植到ZYNQ中的ARM芯片中。本文将针对xilinx的专用开发环境petalinux,进行入门和开发,本文petalinux的运行环境依然在虚拟机的linux系统里,即将体验petalinux相对于传统方式的便捷和强大之处 一、安装petalinux -1.安装虚拟机,在虚拟机里安装linux系...
它的配置非常简单,只需要配置上支持模块的 linux-headers 包,然后应用 platform.linux.driver 构建规则就行了。 然后直接执行 xmake 命令,一键编译,生成内核驱动模块 hello.ko。 代码语言:javascript 代码运行次数:0 运行 AI代码解释 $ xmake [ 20%]: ccache compiling.release src/add.c [ 20%]: ccache compil...
my_driver.c #include<linux/kernel.h> #include<linux/init.h> #include<linux/module.h> static int __init init_func(void) { printk(KERN_INFO "Welcome to my first simple linux device driver\n"); printk(KERN_INFO "Kernel Module Inserted\n"); return 0; } static void __exit exit_func...
Windows 驱动模型Windows Driver ModelWDM为设备驱动定义了一个干净的接口框架。Windows 保持这些接口的源代码和二进制的兼容性。编译好的 WDM 驱动通常是前向兼容性也就是说一个较旧的驱动能够在没有重新编译的情况下在较新的系统上运行但是它当然不能够访问系统提供的新功能。但是驱动不保证后向兼容性。
driver = { .name = "res_ts_drv", .of_match_table = res_ts_of_match, }, }; static int __init res_ts_driver_init(void) { return platform_driver_register(&res_ts_drv); } static void __exit res_ts_driver_exit(void) { platform_driver_unregister(&res_ts_drv); } module_init(...
1. irq chip driver 的声明: IRQCHIP_DECLARE(gic_v3, "arm,gic-v3", gic_of_init); 定义IRQCHIP_DECLARE 之后,相应的内容会保存到 __irqchip_of_table 里边: #define IRQCHIP_DECLARE(name, compat, fn) OF_DECLARE_2(irqchip, name, compat, fn) #define OF_DECLARE_2(table, name, compat, fn...
2.5g ethernet linux driver ( igc )已更新至版本 4.18.0-425.3.1。 intel® 10 gigabit pci express network driver ( ixgbe )已更新至版本 4.18.0-425.3.1。 intel® 10 gigabit virtual function network driver ( ixgbevf )已更新至版本 4.18.0-425.3.1。 mellanox 5 代网络适配器(connectx ...
VS1053模块与单片机之间的连线图: 3. 驱动代码 3.1 驱动端代码 #include<linux/init.h>#include<linux/module.h>#include<linux/ioctl.h>#include<linux/fs.h>#include<linux/device.h>#include<linux/err.h>#include<linux/list.h>#include<linux/errno.h>#include<linux/mutex.h>#include<linux/slab.h...