在ntp客户端用ntpdate –d serverIP查看,发现有“Server dropped: strata too high”的错误,并且显示“stratum 16”。而正常情况下stratum这个值得范围是“0~15”。 这是因为NTP server还没有和其自身或者它的server同步上。 以下的定义是让NTP Server和其自身保持同步,如果在/ntp.conf中定义的server都不可用时,...
编辑NTP配置文件ntp.conf,该文件通常位于/etc/ntp.conf。 “`bash sudo nano /etc/ntp.conf “` 在打开的ntp.conf文件中,你可以修改服务器以获得时间同步。你可以添加或修改以下行来指定可信的时间源: “`bash server ntp_server1 server ntp_server2 “` 将”ntp_server1″和”ntp_server2″替换为你选择...
从www.ntp.org下载ntp-4.2.0.tar.gz包 用gzip解压ntp-4.2.0.tar.gz 运行./configure 运行make 运行make check 运行make install * 建立/etc/ntp/drift(空) * 建立/etc/ntp.conf,它包括以下内容:(*.*.*.*代表上一级时钟服务器的IP) server *.*.*.* driftfile: /etc/ntp/drift 注意:*.*.*.* ...
server 0.cn.pool.ntp.org server 0.asia.pool.ntp.org server 2.asia.pool.ntp.org 其中0.cn 是中国服务器池,后面两个是亚洲的服务器池。 最新列表见: http://www.pool.ntp.org/zone/cn 启动NTP 服务器 进入ntpd安装后的路径,如/app/ntd, 启动参数如下:: ./ntpd -c /etc/ntp.conf -p /tmp/n...
#/tmp/wget http:///ntp_chinese/down/server/ntp-4.2.0.tar.gz # tar -zxvf ntp-4.2.0.tar.gz –C /usr/local/src;cd /usr/local/src/ntp-4.2.0 1. 2. 2. 开始设定参数、编译与安装: #./configure --prefix=/usr/local/ntp --enable-all-clocks --enable-parse-clocks ...
Linux下快速搭建ntp时间同步服务器 一、搭建时间同步服务器 1、编译安装ntp server wgethttp://www.eecis.udel.edu/~ntp/ntp_spool/ntp4/ntp-4.2.6.tar.gz tar zxvf ntp-4.2.6.tar.gz cd ntp-4.2.6 ./configure --prefix=/usr/local/ntp --enable-all-clocks --enable-parse-clocks...
一. 配置/etc/ntp.conf NTP Server的主要配置文件为/etc/ntp.conf ,没有修改过的ntp.conf文件内容如下所示,配置选项都有相关注释信息(Linux 版本为 cenots7.3) 各个选项信息: #系统时间与BIOS事件的偏差记录 driftfile /var/lib/ntp/drift restrict 控制相关权限。
Configure the NTP service on the Linux server, import the NTP certificate and configure NTP parameters on DeviceManager, and enable the storage system to normally synchronize time.Configuring the NTP Service on the Server Configuring NTP Parameters on the Storage System ...
Linux下快速搭建ntp时间同步服务器 一、搭建时间同步服务器 1、编译安装ntp server wget[url][/url] tar zxvf ntp-4.2.4p4.tar.gz cd ntp-4.2.4p4 ./configure --prefix=/usr/local/ntp --enable-all-clocks --enable-parse-clocks make && make install...
#/tmp/wgethttp://ntp.buptnet.edu.cn/ntp_chinese/down/server/ntp-4.2.0.tar.gz # tar -zxvf ntp-4.2.0.tar.gz –C /usr/local/src;cd /usr/local/src/ntp-4.2.0 2.开始设定参数、编译与安装: #./configure --prefix=/usr/local/ntp --enable-all-clocks --enable-parse-clocks ...