CONFIG_DEBUG_FS=y 挂载debugfs文件系统: mount-t debugfsnone/sys/kernel/debug 代码实现 读写变量: #include< linux/debugfs.h >#include< linux/module.h >#include< linux/types.h >staticstructdentry*ion_dir;staticu64 test_u64 =0;staticint__initdebugfs_init(void){//创建一个/sys/kernel/debug/...
使能debugfs开关 要使用动态打印,必须在内核配置时打开CONFIG_DEBUG_FS宏。 CONFIG_DEBUG_FS=y 挂载debugfs debugfs默认会挂载到 /sys/kernel/debug,如果没有挂载,可以执行以下命令挂载: mount -t debugfs none /sys/kernel/debug 代码实验 #include <linux/module.h> #include <linux/kernel.h> #include <linux...
仅当内核编译时启用了DEBUG_FS配置选项,才会激活对debugfs的支持。 因而向debugfs注册文件的代码,都会被 C 预处理器条件语句包围,来检查CONFIG_DEBUG_FS。 编程接口: 由于debugfs代码非常干净、简单、文档情况良好,所以不必对其实现多加评注。只需讨论其编程接口就足够了。这是对 libfs 例程的非常好的应用。有3个函数...
CONFIG_DEBUG_FS=y 挂载debugfs文件系统: mount -t debugfs none /sys/kernel/debug 代码实现 读写变量: #include<linux/debugfs.h>#include<linux/module.h>#include<linux/types.h>staticstructdentry*ion_dir;staticu64 test_u64=0;staticint__initdebugfs_init(void){//创建一个/sys/kernel/debug/ion目...
CONFIG_DEBUG_FS=y 使用debugfs的内核模块 很多低功耗相关的模块都使用了debugfs clk regulator pinctrl gpio devfreq pm etc debugfs的使用 创建目录 使用debugfs的代码应该包括<linux/debugfs.h>。然后,第一步是创建至少一个目录来保存一组debugfs文件。
要使用动态打印,必须在内核配置时打开CONFIG_DEBUG_FS宏。 AI检测代码解析 CONFIG_DEBUG_FS=y 1. 挂载debugfs debugfs默认会挂载到 /sys/kernel/debug,如果没有挂载,可以执行以下命令挂载: AI检测代码解析 mount -t debugfs none /sys/kernel/debug 1. ...
要使用debugfs,需要在内核编译配置中配置CONFIG_DEBUG_FS选项,一般的发行版都会默认编译进了内核,并且将其自动挂载默认的目录(/sys/kernel/debug),可通过以下命令查看: 也可手动挂载到其它位置: $ mkdir /debugfs $ mount -t debugfs none /debugfs 2. 利用debugfs导出基本数据类型的变量 ...
include/linux/device.h include/linux/dynamic_debug.h lib/dynamic_debug.c 代码语言:javascript 代码运行次数:0 运行 AI代码解释 //使能CONFIG_DYNAMIC_DEBUG后则根据control信息动态打印 #if defined(CONFIG_DYNAMIC_DEBUG) #define dev_dbg(dev, format, ...) do { dynamic_dev_dbg(dev, format, ##__VA...
如果输出中包含CONFIG_DEBUG_FS=y,则表示已启用DebugFS支持。 手动挂载DebugFS: 手动挂载DebugFS: 问题2:DebugFS权限问题 原因:DebugFS通常只对root用户或具有适当权限的用户可见,普通用户可能无法访问。 解决方法: 使用root用户访问DebugFS: 使用root用户访问DebugFS: ...
打开内核动态调试开关,make menuconfig选中CONFIG_DYNAMIC_DEBUG以及CONFIG_DEBUG_FS Linux启动后,使用命令行挂载上dbgfs 复制 mkdir /mnt/dbgmount -t debugfs none /mnt/dbg 1. 2. 使用下面方式控制你想输出dev_dbg()信息 1.控制某个文件所有dev_dbg(),echo -n "file xxx.c +p" > /mnt/dbg/dynamic_de...