bind [-lpsvPSVX] [-m keymap] [-f filename] [-q name] [-u name] [-r keyseq] [-x keyseq:shell-command] [keyseq:readline-function or readline-command] DESCRIPTION Set Readline key bindings and variables. Bind a key sequence to a Readline function or a macro, or set a Readline va...
notably if the server process is hacked, the attacker will have limited filesystem privileges. Whilst binding port 80 is a somewhat contrived example—it would be better to run the server on a different port so that the container doesn’t require any capabilities—it still serves to demonstrate...
3)开始安装[/home/pengpeng/miniconda3]>>>PREFIX=/home/pengpeng/miniconda3Unpackingpayload...Collectingpackagemetadata(current_repodata.json):doneSolvingenvironment:done## Package Plan ##environmentlocation:/home/pengpeng/miniconda3added/updatedspecs:-_libgcc_mutex==0.1=main-brotlipy==0.7.0=py38h27c...
出现gcc: error: unrecognized command line option '-V' 这种问题是gcc版本太低了。导致编译出错。根据里面的要求 gcc -qversion >&5 将gcc版本更换为5以上的版本。更换后还有这两类问题,不用管。一般不会影响安装,进行其他步骤即可。 更换gcc版本方法,不予赘述:CentOS下快速升级gcc版本 4、proj版本问题 中间多...
Each kernel in the boot loader menu takes its kernel command line from its BLS snippet. This new default behavior is caused by the GRUB_ENABLE_BLSCFG=true option. For details, see New features in Bootloader. RHEL for Edge Key highlights for RHEL for Edge: Support added to t...
arm linux版本 redis arm+linux,平台:虚拟机:VirtualBoxUbuntu9.10文件传输工具:SSHSecureShellClient-3.2.9交叉编译环境:arm-linux-gcc-4.3.2与开发板通信:tftpUboot移植步骤一:建立交叉编译环境:arm-linux-gcc-4.3.21.将arm-linux-gcc-4.3.2.tgz复制到任意路径下;
[*] Initial RAM filesystem and RAM disk (initramfs/initrd) support (_install) Initramfs source file(s) 1. 2. Boot options ---> () Default kernel command string 前面括号是空的 1. 2. 配置Memory split 为3G/1G user/kernel split,并打开高端内存 ...
This section describes two common ways of placing Arbitrary Artifacts in the system: Section 2.5.1, “Using the install command” Section 2.5.2, “Using the make install command” 2.5.1. Using the install command Packagers often use the install command in cases when build a...
time - time a simple command or give resource usage time 命令用于计算程序消耗的系统时间,使用方法是: 1[etl@ll-etl-02~]$timetest.sh2test.shisdone.3real 0m1.003s4user 0m2.000s5sys 0m0.003s 13.查看找文件(find,grep,awk更多的请参照man page或shell编程专题讲解) ...
Run the following command to modify the configuration file of atop: vi /etc/sysconfig/atop Modify the following parameters, save the modification, and exit: Change the value of LOGINTERVAL to, for example, 15. The default value of LOGINTERVAL is 600, in seconds. Change the value of LOGGE...