将模块从内核中独立出来,不必预先『绑』在 kernel codes 中。这样做有三种优点: 第一, 将来修改 kernel 时,不必全部重新compile,可节省不少时间;第二, 若需要安装新的 modules ,不必重新 compile kernel,只要插入 (通过insmode指令) 对应的 modules 即可;第三,减少内核对系统资源的占用,内
To do autoclean every 2 minutes: '''/2 ''' * ''' ''' test -f /proc/modules && /sbin/modprobe -r insmod 与 modprobe 都是载入 kernel module,不过一般差别于 modprobe 能够处理 module 载入的相依问题。 比方你要载入 a module,但是 a module 要求系统先载入 b module 时,直接用 insmod 挂入...
The default SELinux Policy will prevent the Auto-Protect kernel modules from loading. Resolution To allow the the Auto-Protect kernel modules to load, you can either disable enforcement of the SELinux policy or create a custom SELinux policy to allow the Auto-Protect kernel modules. To disabl...
pf2 ; then set gfxmode=auto load_video insmod gfxterm --snip-- Later in this file you should see the available boot configurations, each beginning with the menuentry command. You should be able to read and understand this example based on what you learned in the preceding section: 在本...
modprobe可以解决load module时的依赖关系,它是通过/lib/modules/<kernel-version>/modules.dep(.bb)文件来查找依赖关系的;而insmod不能解决依赖问题。 如有2个模块g_file_storage.ko和udc.ko,g_file_storage.ko依赖于udc.ko,在加载g_file_storage.ko前必须先加载udc.ko,如果使用insmod加载,必须按顺序一个一个...
MODULES=(!moduleA!moduleB) load_modules: 有用的启动参数如果您在内核启动参数中加入load_modules=off,那么udev会停止任何自动加载工作. 如果系统出现问题时,这个功能会十分有用。如果udev加载了有问题的模块导致系统挂起或者其它严重的问题时,你可以使用这个参数来禁用自动加载,以此来防止加载有问题的模块。已知的硬...
Kernel启动阶段 初始化system trusted keyrings 由内核选项CONFIG_MODULE_SIG_KEY指定的对内核模块进行签名的key文件会在这个阶段被加载到builtin trusted keyring中。 用户态运行时阶段 加载内核模块 当加载内核模块时,会对内核模块的签名进行认证。最终认证的结果会保存在info->sig_ok中。 static int load_module(st...
bool "Debug duplicate modules with auto-loading" help Module autoloading allows in-kernel code to request modules through the *request_module*() API calls. This in turn just calls userspace modprobe. Although modprobe checks to see if a module is already loaded before trying to load a module...
第二行如果CONFIG_TTY_PRINTK 赋值y就compile built-in, 如果赋值m就compile成module,如果未定义就不compile。 需要要build的kernel target 首先要知道bootloader 可以load什么。 U-Boot 可以boot uIamge,可以用bootz命令boot zImage x86 需要bzImage 其他bootloader 需要zImage 作者这里给出了一个zImage的例子 make ...
kmemleak功能开关,打开后会建立/sys/kernel/debug/kmemleak接口 3、CONFIG_DEBUG_KMEMLEAK_DEFAULT_OFF 此宏打开后,kmemleak默认关闭,可以通过cmdline中通过kmemleak=on打开 4、CONFIG_DEBUG_KMEMLEAK_AUTO_SCAN 支持kmemleak自动扫描,可以设置扫描时间间隔,默认为600秒,关闭则不会自动扫描 5、CONFIG_DEBUG_KMEMLEAK_...