current state表示接口的物理状态,和三层业务及协议没有关系。 Line protocol current state表示该接口的链路协议状态,与协议有关。 对于二层接口,一般物理状态current state为Up,协议状态Line protocol current state就会是Up的。 对于三层接口,只有物理状态current state为Up,并且协议协商也成功后,协议状态Line protocol...
一台MSR路由器通过广域网接口连接到Internet,在该MSR路由器上看到如下接口显示信息:Mp-group1currentstate:UPLineprotocolcurrentstate:UPDescription:Mp-group1InterfaceTheMaximumTransmitUnitis1500,Holdtimeris10(sec)InternetAddressis172.16.1.100/24PrimaryLinklayerprotocolisPPPLCPopened,MPopened,IPCPopenedPhysicalisMP,...
Ethernet0/0 current state :UPLine protocol current state :UPDescription :Ethernet0/0 InterfaceThe Maximum Transmit Unit is 1500,Hold timer is 10(sec)Internet Address is 221.195.59.162/27IP Sending Frames' Format is PKTFMT_ETHNT_2,Hardware address is 000f-e277-4b6bMedia type is twisted pair...
问题描述: Current state: UP Line protocol state: DOWN(LAGG) 2024-07-18提问 举报 (0) 2 个回答 按时间 按赞数 无名之辈 您好,动态聚合的话,检查下线路是否接正常,如果对接没有问题,则debugging lacp 反馈400看下 2024-07-18回答 评论(0) 举报 (0) 得闲饮奶425 您好,请知: 从反馈的信息来...
如果希望将该接口UP,则需要在对应接口视图下执行undo shutdown命令。 说明:对于二层物理接口(设备的以太网接口默认工作在二层模式),只要物理状态current state为UP,协议状态Line protocol current state一定是UP的。例如,二层物理接口连线正确,并且接口属性配置正常后,物理状态current state和协议状态Line protocol ...
华为路由器怎么查看端口流量是多少Ethernet0/0 current state :UPLine protocol current state :UPDescription :Ethernet0/0 InterfaceThe Maximum Transmit Unit is 1500,Hold timer is 10(sec)Internet Address is 221.195.59.162/27IP Sending Frame
Interface: Ten-GigabitEthernet2/0/6 Protocol: IPv4 如果接口配置了ipv4地址,且Current state和Line protocol state都是UP状态的话,对应的track项将是Positive状态;如果Line protocol state是down的话,无论是否配置了ipv4地址,对应的track项都是Negative状态。
Serial0/0 current state: UP Line protocol current state: DOWN Physical layer is synchronous, Baudrate is 64000 bps Interface is DCE, Cable type is V、35, Clock mode is DCECLK 那么该接口上可能封装或运行了哪种协议 。——[多选题]
必应词典为您提供line-protocol-current-state的释义,网络释义: 协议当前状态;接口的链路层协议状态;链路层协议当前状态;
路由器S0/0 接口通过帧中继接入网络,在此路由器上看到如下接口信息: [MSR] display interface Serial 0/0 Serial0/0 current state: UP Line protocol current state: UP Internet Address is 3.3.3.1/24 Primary Link layer protocol is FR IETF...