$ cat /etc/udev/rules.d/60-openocd.rules # Copy this file to /etc/udev/rules.d/ # If rules fail to reload automatically, you can refresh udev rules # with the command "udevadm control --reload" ACTION!="add|change", GOTO="openocd_rules_end" SUBSYSTEM=="gpio", MODE="0660", ...
写的都不详细，这里记录下最完整的配置过程： 首先打开Windows 7的网络和共享中心，然后点左边的更改适配器设置，你会看到两个由VMware创建的虚拟连接，找到VMware Network Adapter VMnet1，记住它的连接名称。 然后右击你当前使用中的连接（比如我使用的是ADSL连接）选择属性，把全部的钩都打上，
return ERROR_FAIL; int r = jtag_libusb_control_transfer(priv->usb_device, LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR, VEND_JTAG_GETTDO, 0, 0, &tdo, 1, LIBUSB_TIMEOUT_MS); if (r < 1) LIBUSB_ENDPOINT_IN | LIBUSB_REQUEST_TYPE_VENDOR, VEND_JTAG_GETTDO, 0, 0, &tdo, 1...
In my case, getting this to Build and Install and process would fail at multiple stages like Errors above, and at some tar.bz2 extract stages. This is what I did via Terminal and then GUI as I encountered errors: 1 - a few errors at first were simple syntax errors (facepalm complete)...