r = libusb_init_context(/*ctx=*/NULL, /*options=*/NULL, /*num_options=*/0); if (r < 0) return r; - + libusb_set_option(NULL, LIBUSB_OPTION_USE_USBDK); // If not set externally, and no debug option was given, use info log level if ((old_dbg_str == NULL) && (!deb...
from PC-end... --Set up the MMU and enable I and D cache-- - Checkif I cache is enabled-Enabling I cache since it wasdisabled- Push base address of TTB to TTB- Config MAIR_EL3- Enable MMU- Data Cache has been enabled- Check system mem...
Looking at our Darwin backend, the error comes from GetPipePropertiesV3() before the bulk transfer is actually submitted. I am not sure if it is relevant here, but we are not using GetPipePropertiesV3() consistently, but still the now deprecated GetPipeProperties() in some places, in parti...
LIBUSB_REQUEST_SET_SEL = 0x30, /** Delay from the time a host transmits a packet to the time it is * received by the device. */ LIBUSB_SET_ISOCH_DELAY = 0x31, }; /** \ingroup libusb_misc * Request type bits of the ...
* New libusb_get_port_numbers API, this is libusb_get_port_path without the unnecessary context parameter, libusb_get_port_path is now deprecated * New libusb_strerror API (#14) * New libusb_set_auto_detach_kernel_driver API (#17) ...
from PC-end... --Set up the MMU and enable I and D cache-- - Checkif I cache is enabled-Enabling I cache since it wasdisabled- Push base address of TTB to TTB- Config MAIR_EL3- Enable MMU- Data Cache has been enabled- Check system mem...
libusb_set_debug(NULL, debug_mode?LIBUSB_LOG_LEVEL_DEBUG:LIBUSB_LOG_LEVEL_INFO);Core: Add a libusb_strerror() function 9 years ago 1082 if (error_lang != NULL) { 1083 r = libusb_setlocale(error_lang); 1084 if (r < 0) 1085 printf("Invalid or unsupported locale '%s':...
"DEBUG: Failed to check whether %04x:%04x has the \"usblp\" kernel " "module attached.\n", devdesc.idVendor, devdesc.idProduct); goto error; } /** Set alternate setting, but only if there is more than one option. Some * printers (e.g., Samsung) don't like usb_set_alt...
from PC-end... --Set up the MMU and enable I and D cache-- - Checkif I cache is enabled-Enabling I cache since it wasdisabled- Push base address of TTB to TTB- Config MAIR_EL3- Enable MMU- Data Cache has been enabled- Check system mem...
LIBUSB_REQUEST_SET_SEL = 0x30, /** Delay from the time a host transmits a packet to the time it is * received by the device. */ LIBUSB_SET_ISOCH_DELAY = 0x31, }; /** \ingroup libusb_misc * Request type bits of the * \ref libusb_control_setup::bmRequestType "bm...