We often come across a situation where a USB device which runs perfectly on Windows platform does not even get detected on Linux. Lack of support for USB devices is one of the reason why some people don't embrace Linux. Now there is a new API by name Libusb which helps the developers ...
如果知道设备的 VID、PID,那么可以使用 libusb_open_device_with_vid_pid 来找到它、打开它。这个函数的内部,先使用libusb_get_device_list列出所有设备,然后遍历它们根据 ID 选出设备,接着调用 libusb_open 打开它,最后调用 libusb_free_device_list 释放设备。 libusb_open_device_with_vid_pid 函数原型如下...
一、libusb常用数据结构libusb_device *list:设备列表libusb_device_handle *handle:设备句柄 structlibusb_device_descriptor desc:设备描述符 structlibusb_config_descriptor conf:配置描述符 二、libusb常用API函数 1 会话的开启和结束 intlibusb usb
libusb_device *dev = list[i]; libusb_open(dev,&handle); 获取第i个设备并使用handle进行处理。 struct libusb_device_descriptor desc; usb设备描述结构体。 struct libusb_config_descriptor conf; usb设备配置描述结构体。 libusb_get_device_descriptor(dev, &desc);获取usb设备描述。 libusb_get_config...
打开设备:使用libusb_open_device_with_vid_pid()函数打开具有指定厂商ID和产品ID的设备。该函数返回一个设备句柄,您可以使用该句柄与设备进行通信。 配置设备:在打开设备后,您可能需要配置设备的接口和端点。这可以通过调用libusb_set_configuration()函数来完成。
libusb_device *dev;inti =0, j =0;uint8_tpath[8];while((dev = devs[i++]) !=NULL) {structlibusb_device_descriptordesc;intr =libusb_get_device_descriptor(dev, &desc);if(r <0) {fprintf(stderr,"failed to get device descriptor");return; ...
libusb_get_device_list(ctx, &devs); if (cnt < 0) { fprintf(stderr, "Failed to get device list\n"); libusb_exit(ctx); exit(1); } printf("Found %ld devices\n", cnt); for (i = 0; i < cnt; i++) { struct libusb_device_descriptor desc; r = libusb_get_device_...
] 是一個 user-space 的 USB 程式庫,在 embedded linux 應用實作上,我們會使用 libusb 實作一個 host 端的應用程式,並透過 USB 介面存取或控制 target device。 找到所有 USB bus 與 USB device 要撰寫一支 user-space 的 USB device 控制程式,最首要的工作就是找到自己的 USB 裝置。這個工作主要透過以下 ...
如果数据是IN 方向,握手信号应该是Host端发出;如果数据是OUT方向,握手信号应该是Device端发出。握手信号可以为ACK, 表示正常响应,NAK, 表示没有正确传送。STALL,表示出现主机不可预知的错误。 如图所示: Bulk传输 Bulk传输时的令牌 2.控制传输事务 控制传输是负责向USB设置一些控制信息,传送这种事务的管道是控制管道。
libusb_device **devs; libusb_context *ctx = NULL; ret = libusb_init(NULL); if(ret < 0) { fprintf(stderr,"failed to initialise libusb\n"); return1; } dev_handle = libusb_open_device_with_vid_pid(NULL, 0x03eb, 0x2421); ...