Re: Thinkpad T470 bottom cover tamper detection error Thanks, I think I found the switch, and if i'm correct, it's on the left side next to the external battery. I don't seem to find anything physically wrong though, nothing broken or out of place. I'm thinking ...
245 Info. An existing disk channel target device is not responding to SCSI discovery commands. Recommended actions • Check the indicated target device for bad hardware or bad cable, then initiate a rescan. 246 Warning The coin battery is not present, is not properly seated, or has reached ...
├─Battery:│ Device ID: f95c9218acd12697af946874bfe4239587209232│ Summary: UEFI ESRT device│ Current version: 1.1.9482│ Minimum Version: 0.0.1│ Vendor: Lenovo (DMI:LENOVO)│ Update State: Success│ Update Error: Cannot install update when system battery is not at least 25%│ GUID: 8...
May 07 22:23:31 lwirth-tp kernel: snd_acp_config snd_soc_acpi amd_sfh watchdog platform_profile tiny_power_button wmi_bmof snd i2c_hid_acpi snd_pci_acp3x mhi tpm_tis i2c_hid i2c_piix4 k10temp soundcore tpm_tis_core thermal roles battery ac fan hid serial_multi_instantiate> May 07...
But really though, unless you plan on never using this laptop on battery much, I would just leave Hybrid mode ticked. Adv Optimus worked really well and wasn’t riddled with bugs as I’ve seen on other units. Hardware and performance ...
Battery (~0.5 W when TB3 hot-plug is disabled, ~2W when enabled) Sleep Power Management Webcam SD card reader External Monitor connecting with USB-C External Monitor using HDMI What isn’t working: Fingerprint reader (disabled in BIOS) Hibernation I th...
The monitor works fine with my PC. My old ThinkPad T470p (also on Arch Linux) also worked fine with this monitor, connected with DP-cable. Its not the monitor. At this time I have no HDMI-cable to test this connection. Maybe someone can see something helpful insid...
Describe the bug Sometimes I attempt to upgrade the system firmware on my Lenovo ThinkPad X390 with fwupd, and the upgrade doesn't happen, and GRUB gets removed from the boot order, and I end up booting into Windows. This is likely not a...
F1 at startup or restart to access BIOS, Config tab, Power, Disable built-in battery. Laptop shuts down. If running Windows 8 a "normal" shutdown is more like hibernation and hardware or BIOS changes should not be made in that state. Either do a restart (which doe...