The waveguides are fabricated with spin-coated Benzocyclobutene sandwiched between a ground plane and photolithographically defined top capacitive metal pads. Angle-resolved reflection spectroscopy measurement is used to map the dispersion of this metamaterial surface, which reveals strong resonant absorptions...
2.1.1532 Part 1 Section 21.2.2.155, rAngAx (Right Angle Axes) 2.1.1533 Part 1 Section 21.2.2.156, rich (Rich Text) 2.1.1534 Part 1 Section 21.2.2.161, scatterChart (Scatter Charts) 2.1.1535 Part 1 Section 21.2.2.163, secondPiePt (Second Pie Point) 2.1.1536 Part 1 Sectio...
To identify the polarity of the cell intercalation, we examined the cell boundaries during the A8a cell directional movement, and measured the angle y formed by the remodelled junctions with the AP axis (Fig. 3c,d). As shown in rose diagrams depicting the frequency of cell boundaries ...
It can be seen that the metamaterial configurations have an effect on the magneto-optical transport properties of the electromagnetic waves. Particularly, the sign of the plane polarization rotation angle in a left-handed medium (LHM) is opposite to the sign of the rotation angle in a Open ...
Denoting this angle by α, the expression for the force becomes FρAV2=f(Rn,α) This resultant force F (Figure 8.6) can be resolved into two components. That normal to the direction of flow is termed the lift, L, and the other in the direction of the flow is termed the drag, D....
2.1.1559 Part 4 Section 5.7.2.156, rAngAx (Right Angle Axes) 2.1.1560 Part 4 Section 5.7.2.157, rich (Rich Text) 2.1.1561 Part 4 Section 5.7.2.158, rotX (X Rotation) 2.1.1562 Part 4 Section 5.7.2.159, rotY (Y Rotation) 2.1.1563 Part 4 Section 5.7.2.160, roundedCorner...
Sagittal planeSpinal curvatureLordosisKyphosisScoliosisThe presence of low degree lumbar scoliosis can result in deepening of lumbar lordosis in the standing posture, but it does not significantly affect kyphosis angle measured in standing and sitting position. Zebris CMS 10 System is a useful tool for...
(i.e. shortening or lengthening along the apex-base direction), thus allowing only in-plane motion, while leaving the remaining myocardial boundaries unrestricted [40,64,65]. In terms of in-plane motion, Chen et al. [40] and Syomin et al. [65] only allowed radial wall motion (i.e. ...
The first step was to extract and refine the centerline of the human left coronary arteries with the use of MIMICS software. The centerlines were formed by a series of center points that are located at the center of the cross-sectional plane of the 3D coronary artery. Then proceed as ...
The first step was to extract and refine the centerline of the human left coronary arteries with the use of MIMICS software. The centerlines were formed by a series of center points that are located at the center of the cross-sectional plane of the 3D coronary artery. Then proceed as ...