A leaky shut-off valve can be a big trouble as it can lead to water damage and increased utility bills. The good news is that fixing a leaky multi-turn shut-off valve, typically found under bathroom sinks and toilets, is cheap and easy. You can easily repair the valve and stop the l...
When removing your old flapper, you will first need to turn the water off at the shut-off/supply valve. Next, disconnect the chain or tail from the trip lever arm and then slip the ears of the flapper off of the trunnion ears. You will need to select a new flapper that, as near a...
If you're lucky, the leak will stop. If tightening the bolts doesn't help, you'll have to remove the toilet and replace the wax gasket. Removing the toilet The first step is to turn off the water at the shutoff valve, which is usually located behind the toilet, or in the basement...
Shut off the water supply to the shower and protect the surface of the tub or shower floor. Cover the drain to prevent accidentally dropping small parts down it. Remove the handle, trim, and sleeve, then use a plumber’s deep socket to extract the faucet stem from the valve body. Replac...
Locate the shutoff valve in the back of the toilet, below the tank. It’ll usually be connected to a pipe coming out of the wall, although it may feed into the floor. Turn this valve clockwise as far as you can to turn the water off.[1] You can skip this process entirely if ...
Do I need to shut off the main water supply before I do this? David Balkan Professional Plumber & CEO of Balkan Sewer & Water Main Expert Answer No, every sink has its own shutoff valve that you can use. It should be under the sink. You just need to turn the water supply to ...