解释“lcp terminated by peer (user request)”的含义 "lcp terminated by peer (user request)" 是一个在网络通信中,特别是在使用PPP(点对点协议)或类似协议时可能遇到的错误消息。LCP(链路控制协议)是PPP协议的一部分,用于建立、配置、测试和终止数据链路连接。这个错误表明LCP连接被对端(peer)终止了,原因是用...
Dear developer: Thanks for your project. But for me there is a problem that stop me from using it to connect to my university's vpn channel and I have no idea about how to solve it at all. Hope you could help me. Start from the server: I...
phase is authenticating, by the peer *aug 20 08:25:30.548: vi3 pap: using hostname from interface pap *aug 20 08:25:30.548: vi3 pap: using password from interface pap *aug 20 08:25:30.548: vi3 pap: o auth-req id 1 len 35 from " 2103072@tedata.net.eg " *aug 20 08:25:...
Before establishing communications over a point-to-point link, each end of the PPP link sends out LCPpackets. The LCP packet either accepts or rejects the identity of its linked peer, agrees upon packet size limits and looks for common misconfiguration errors. It checks the connection to see w...
Solved: I tray to enable pppoe on the cisco 1841 router but i'm facing lcp negotiation failure regarding MRU mismatch and the session terminated. i tried to use the both "ppp mtu adaptive" and "ppp-max-payload" commands but it's
[PAP AuthReq id=0x1 user="blank" password=<hidden>] sent [PAP AuthAck id=0x1 "Login ok"] PAP peer authentication succeeded for blank sent [IPCP ConfReq id=0x1 <addr 192.0.2.2>] sent [IPV6CP ConfReq id=0x1 <addr fe80::c9af:1e91:ed32:8ff3>] rcvd [LCP EchoRep id=0x0 magic...
dwTerminateReason: Specifies the reason the connection was terminated by the local computer. This member always has a value of zero (0). dwRemoteTerminateReason: Specifies the reason the connection was terminated by the remote computer. This member always has a value of zero (0). dwOptions: ...
dwTerminateReason:Specifies the reason the connection was terminated by the local computer. This member always has a value of zero (0). dwRemoteTerminateReason:Specifies the reason the connection was terminated by the remote computer. This member always has a value of zero (0). ...
I tray to enable pppoe on the cisco 1841 router but i'm facing lcp negotiation failure regarding MRU mismatch and the session terminated. i tried to use the both "ppp mtu adaptive" and "ppp-max-payload" commands but it's not supported on the router image. so i want any help to ...
dwTerminateReason: Specifies the reason the connection was terminated by the local computer. This member always has a value of zero (0). dwRemoteTerminateReason: Specifies the reason the connection was terminated by the remote computer. This member always has a value of zero (0). dwOptions: ...