Finite element models are able to predict the maximum shear stress of hybrid composites provided that the constitutive parameters of cohesive elements are validated by experimental results.doi:10.1016/j.prostr.2016.02.009Lopes, J.Stefaniak, D.Reis, L.Camanho, P.P.Elsevi...
(it peaks at the edges of thejointas previously shown inFig. 3), the reported shear stress is lower than the true ultimate strength of the adhesive. While this test specimen is relatively easy to fabricate andtest, it does not give a true measure of the shear strength due to adherend ...
Stress Analysis of Adhesively Bonded Electroprimed Steel Lap Shear JointsSingle-lap-shear jointfinite element methodpeel stressshear stresslap-shear strengthbondline interfaceStructural applications for adhesive bonding have been increasing in recent years due to improvements in the types of adhesives ...
It was found that if the overlap length is long enough, increasing the length does not reduce the maximum shear stress. It was also found that the maximum shear stress occurs at the loaded side of the thinner plate when the material is the same, and occurs at the loaded side of the ...
thermal stress crackingtin/ lap shear testSn-rich solder-Cu couplesThe lap-shear technique is commonly used to evaluate the shear, creep, and thermal fatigue behavior of solder joints. We have conducted a parametric experimental and modeling study, on the effect of testing and geometrical ...
Two jigs for bonding and testing small Al-alloy lap shear test pieces are described. These jigs enabled the precise measurement of shear stress-strain curves for lap joints and led to reproducible shear strength values. Results obtained for diffusion bonded lap joints between clad Al-Zn-Mg (...
shear stress positive regulation of histone acetylation positive regulation of protein dephosphorylation negative regulation of T cell proliferation regulation of protein import into nucleus positive regulation of protein import into nucleus positive regulation of odontogenesis response to drug myelination ...
This procedure can be applied using any Mach-1 result file obtained following a lap shear test on a sample. Some parameters must be specified in an associated protocol: the filename(s) containing results from a stress relaxation shear test and/or sinusoid test and parameters for the extraction...
2.2.2.2 Lap shear tests The lap shear test is the most common type of shear test. Early works include those by Jellinek [111,112] and Ford and Nichols [6,132]. These tests appear to have the apparent advantage of having an extremely low stress concentration, however this is not accurate...
Large-scale simple shear test on mechanical properties of interface between concrete face and gravel underlayer; 砾石垫层—混凝土接触面力学特性单剪试验研究 2. Mechanical characteristics of the soil-structure interface in response to simple shear tests under constant stress increment ratio paths; 土与...