PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at. PID_TEST_BED TEMP=70 SAVE_CONFIG(once completed) PID tune the extruder while part cooling fan runs at 25%. PID_TEST_HOTEND TEMP=245 ...
So a theory I had was that as the X stepper, that gets fairly hot, passes by the Einsy control box as along the print, it eventually passes the USB cable connection on top of the Einsy box. I was thinking that the USB cable could become so hot that, well, it could cause problems...
PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at. PID_TEST_BED TEMP=70 SAVE_CONFIG (once completed) PID tune the extruder while part cooling fan runs at 25%. PID_TEST_HOTEND TEMP=245 SAVE_CONFIG (once completed) Calibrate X-Twist-Com...