然后查看我们的core_read函数: 发现这里存在漏洞,可以通过设置off的值来泄露canary等信息。 再查看我们的core_ioctl函数,发现这里可以设置我们的off,从而leak出有用的信息: 这里的漏洞点不太容易注意到,这里的函数参数a1即输入是八字节的有符号整数,而在qmemcpy函数中则...
其中常用的就是read,write等函数。之后也是正常的调用函数,套路编写。 // 读设备 ssize_t xxx_read(struct file *filp, char __user *buf, size_t count, loff_t *f_pos) { ... copy_to_user(buf, ..., ...); //内核空间到用户空间缓冲区的复制 ... } // 写设备 ssize_t xxx_write(stru...
#include<stdio.h>#include<unistd.h>#include<stdlib.h>#include<string.h>#include<fcntl.h>#include<sys/ioctl.h>char * buf = "test for read and write..";int main(void){ char ch[0x100]; int fd = open("/dev/peiwithhao",2); int len = strlen(buf); ioctl(fd,0x1000,...
raw_cpu_ptr IS_ENABLEDdo{ tid =this_cpu_read(s->cpu_slab->tid); c =raw_cpu_ptr(s->cpu_slab); }while(IS_ENABLED(CONFIG_PREEMPT) &&unlikely(tid !=READ_ONCE(c->tid))); prefetch: https://www.gnu.org/software/gcc/projects/prefetch.html/staticvoidprefetch_freepointer(conststructkmem_...
用户进程通过 read() 函数向 Kernel 发起 System Call,上下文从 user space 切换为 kernel space。 CPU 利用 DMA 控制器将数据从主存或硬盘拷贝到 kernel space 的读缓冲区(Read Buffer)。 CPU 将读缓冲区(Read Buffer)中的数据拷贝到 user space 的用户缓冲区(User Buffer)。
int read(int fd, *buffer,length); 1. 参数说明: (1).int fd:文件描述符 (2).*buffer:数据缓冲区 (3).length:要读取的字节数 函数返回值: 读操作成功读取返回读取的字节数,失败则返回-1。 3.2 串口写操作(发送端) 写串口操作是通过write函数来完成的。函数原型如下: ...
early_ioremap_pmd函数接收虚拟地址作为参数,返回虚拟地址对应的中层页目录项地址,其定义如下: // file: arch/x86/mm/ioremap.cstaticinlinepmd_t*__initearly_ioremap_pmd(unsignedlongaddr){/* Don't assume we're using swapper_pg_dir at this point */pgd_t*base=__va(read_cr3());pgd_t*pgd=&bas...
下面分析函数nfs_file_read() 如果有O_DIRECT参数,不管page cache是否失效,跳过缓存直接读。 调用nfs_revalidate_mapping_protected,做了如下事情: 如果inode信息过期失效,则更新inode。 如果inode的cache_validity被标记NFS_INO_INVALID_DATA,调用nfs_invalidate_mapping将page cache标记为失效。
2) 0.124 us | rcu_read_unlock_strict; 2) 0.399 us | } 2) | proc_pid_schedstat { 2) | seq_printf { 2) 1.145 us | seq_vprintf; 2) 1.411 us | } 2) 1.722 us | } 2) 2.599 us | } 很容易可以发现是第六行的函数: #ifdef CONFIG_SCHED_INFO/** Provides /proc/PID/schedstat*/...