Remote control the TS-990S from your PC Using the ARCP-990 software (radio control software), you can control most functions from your PC. Control the memory channel, settings, and functions using your PC. Download the free software from the KENWOOD website. ...
day as can be heard on any of the HF bands. With the recent experimentation done with the Kenwood TS-850S/DSP-100combination, this site was developed to share a wealth of information necessary to achieve high quality modulation on SSB and AM. See also my "CleanRF.com" website, an exce...
Mods - Kenwood TS-870 ACC2 Input - C131 Cap Modification (This mod flattens out the ACC2 audio input low frequency response) Disclaimer Notice: The following modifications were obtained from LA4WAA and should be done by qualified personnel at the owners risk. I am not responsible for any ...
These are the Xmitter Mods for the TS-950sdx. They consist of installing a Jensen Audio Xformer into the sdx, installing a TRS connector in the back of the sdx, and modding the circuitry to allow the Line Audio injection into the DSP. ...
TS-990S is limited to the following functions in the operation of the current KSS. •Operation Commander [A / B] in the TS-990S is equivalent to [M / S]. •Memory channel is simplex operation only. •Remote power On/Off is not available on Standby State Low Power Consumption mod...
Or access your USB memory from your PC by connecting your PC via USB cable to the USB-B port on the rear panel, switch to update mode, and a folder named TS-990 will appear on your computer. There are a variety of I/O interfaces, including the microphone jack, analog audio input ...