其他微控制器 其他微控制器论坛 更多 提出相关问题 什么是相关问题？提出新问题 +
j-link -- CPU could not be halted;no sw-dp found;Too many errors to display Error: Cannotread register 16 (XPSR) while CPU is running网上有很多中说法,有说复位电路问题,换电阻、电容解决了的(阻容匹配不好引起的问题吗?);有换驱动版本解决的;有将复位设置成Coreand Peripherals解决的;有说下载线...
These can be set/unset on-the-fly without stopping the processor. They are no skid: they do not execute the instruction they are set on when a match occurs. The CPU is halted before the instruction is executed. 13. Watchpoints: Both the Cortex-M0, M0+, Cortex-M3, Cortex-M4 and ...
SWV will not work with JTAG. 7. Click on the Trace tab. The window below is displayed. 8. In Core Clock: enter 48 MHz. Select Trace Enable. This value must be set correctly to your CPU speed. TIP: To find Core Clock: frequency: Enter the global variable SystemCoreClock in a Watch ...
***JLink Error: Can not read register 15 (R15) while CPU is running ***JLink Error: Can not read register 16 (XPSR) while CPU is running **JLink Warning: CPU could not be halted **JLink Warning: T-bit of XPSR is 0 but should be 1. Changed to 1. ***JLink Error: Failed to ...
设置 Dialog.DLL 分别为:DARMSTM.DLL和TARMSTM.DLL, Parameter 均为:-pSTM32F103RC,用于设置支持芯片的软硬件仿真
j-link出现CPU could not be halted;no sw-dp found;Too many errors to display : 08000004H (Flash=FFH Required=43H) ! . . . . . . Too many errors to display ! 这是在程序下载完进行程序校验的时候出现的,当然把程序校验功能关了,就不会提示这个问题了: 但是程序没法运行起来。 于是我把下载...
***JLink Error: Can not read register 15 (R15) while CPU is running ***JLink Error: Can not read register 16 (XPSR) while CPU is running **JLink Warning: CPU could not be halted **JLink Warning: T-bit of XPSR is 0 but should be 1. Changed to 1. ***JLink Error: Failed to ...
This feature is active even while the CPU is halted. SWV is not used for this feature and can be disabled or not. This feature is used to display data in the Watch and Memory windows, Event Counters as well as an RTX Awareness window. Not only can values of memory locations be ...
其他微控制器 其他微控制器论坛 更多 提出相关问题 什么是相关问题？提出新问题 +