烧写完成后无法使用,提示更新framework,但是总时更新失败。 A new firmware version is available for the connected emulator. Do you want to update to the latest firmware version? … 这个问题是由于电脑中的JLink驱动版本比仿真器中的版本要高。 方法1、用老版本的JLink驱动(点此下载J-Link 4.40c)覆盖Keil...
Hello, I tried CMSIS-DAP v1 mode yesterday, and I worked as expected. However, in CMSIS-DAP v2 mode (Currently unavailble feeature for V11 hardware), it does work for probe-rs. Segger only releases firmware that supports CMSIS-DAP v1 for V11 hardware. For reference:https://www.segger...
This circuit is basically the same as the "LPC-Link2" circuit used on other i.MX RT and LPC products, although it also has an additional mechanism to control the power to the target after the debug probe boots. This board shipped with a debug probe fi...
J-Link is connected. Device "MIMXRT1064XXX6A" selected. Firmware: J-Link V10 compiled Jul 17 2020 16:23:38 Hardware: V10.10 S/N: 50124254 Feature(s): GDB Checking target voltage... Target voltage: 3.35 V Listening on TCP/IP port 2331 Connecting to target... InitTarget() start ...
Could you let us know if the CX3 Denebola kit is used or a custom board? If it is a custom board, could you share the schematics with us? What version of Jlink adapter is being used?Also I see that the target voltage is shown as 1.86V. Is it possible to set the target voltage ...
2. The tests were run with both our own custom PCB and commercially available Embest LPV4357-EVB. There is no difference between the two failure-wise. The failure rate is very much the same for both. 3. Changing speed to 8MHz did not solve the problem. 4. The script has a command...
1.8-5.5V's CPU can be debugged, while the V8 versionThis can only debug 3.3V versions of CPU, while debugging 5vcpu has poor stability.3,Some of the new cpuV8 is no longer supported, and V9 supports more than 98% ARM cpu.ARM V9 emulator (full featured version, support firmware ...
2Stability is different: V8 prone to firmware problems, V9 firmware stable and durable.The V9 driver IC has voltage adaptive capability and automatically adapts to the CPU voltage of the target board when the wiring is correct. 1.8-5.5V's CPU can be debugged, while the V8 versionThis can ...
is available from the _gdb module.Suggest passing --data-directory=/path/to/gdb/data-directory.Connected to targetWaiting for GDB connection...Reading symbols from /Users/ecolak/Entwicklung/_Example-Projects-TEMP/arduino-wifi-scan/.pio/build/pico/firmware.elf...Warning: 'set target-async', an...
Not sure what I'm doing wrong here, I've connected this board the same way as all the other stm32 eval boards using SWD (3.3v, gnd, swdio, swclk, nrst). Any help is greatly appreciated, thanks! Here's my output running on mac…