DIN EN ISO 898-1-2013 碳钢和合金钢制紧固件的机械性能.第1部分具有规定性能等级的螺栓、螺钉和螺柱.粗牙螺纹和细齿节螺纹 星级: 66 页 ISO898-1-2013碳钢和合金钢紧固件的机械性能第1部分:螺栓 星级: 62 页 AS 4291.1-2015 碳钢和合金钢紧固件的机械性能.第1部分:螺栓螺钉和螺柱 星级: 69 页 ...
标准号:ISO 898-1:2013 EN 标准名称:碳钢和合金钢紧固件机械性能第1部分:规定性能等级的螺栓、螺钉和螺柱粗牙螺纹和细牙螺纹的紧固件 英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel — Part 1: Bolts, screws and studs with specified property classes — Coarse thread an...
BSI Standards PublicationBS EN ISO 898-1:2013Mechanical properties of fasteners made of carbon steel and alloy steel Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013)
ISO 898-1-2013 中文名称:碳钢和合金钢制紧固件的机械性能.第1部分:具有规定性能等级的螺栓、螺钉和螺柱.粗牙螺纹和细齿节螺纹 英文名称:Mechanical properties of fasteners made of carbon steel and alloy steel - Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine...
ISO 898-1:2013/Cor 1:2013 在中国标准分类中归属于: J13 紧固件,在国际标准分类中归属于: 21.060.10 螺栓、螺钉、螺柱。 ISO 898-1:2013/Cor 1:2013 碳钢和合金钢制紧固件的机械性能.第1部分:具有规定性能等级的螺栓、螺钉和螺柱.粗牙螺纹和细齿节螺纹.技术勘误表1的最新版本是哪一版?
DS/EN ISO 898-1:2013 被代替标准 DS/EN ISO 898-1:2009 适用范围 ISO 898-1:2009规定了碳钢和合金钢制成的螺栓、螺钉和螺柱在10°C至35°C环境温度范围内测试时的机械和物理性能。紧固件 - 当考虑螺栓、螺钉和螺柱时使用的术语 购买 正式版
将9.1.4 规定的楔垫按图 1 所示置于螺栓或螺钉头下。未旋合螺纹的长度 lth ≥ 1d。 对带短螺纹长度栓接结构螺栓的楔负载试验,允许的未旋合螺纹的长度 lth ≤ 1d。 应按GB/T 228 的规定进行楔负载拉力试验。试验机夹头的分离速率,不应超过 25 mm/min。 拉力试验应持继进行,直至断裂。 测量极限拉力载荷...
alloy steel Part 1: Bolts, screws and studs with specified property classes - Coarse thread and fine pitch thread (ISO 898-1:2013) Licensed copy: The University of Hong Kong, The University of Hong Kong, Version correct as of 07/02/2013 12:40, (c) The British Standards Institution 2012...
ISO 898-1-2013 碳钢和合金钢紧固件的机械性能 第1部分:螺栓.PDF,
内容提示: ISO 898-1:2013(E) 28 © ISO 2013 – All rights reserved ⎯ diameter of any unthreaded shank d s ≈ d or d s > d; ⎯ bolts and screws with nominal length l ≥ 2,7d; ⎯ thread length b ≥ 2,2d; ⎯ studs with total length l t ≥ 3,2d; ⎯ studs with...