L1 LAN IIH:用于广播网络Level-1邻接; L2 LAN IIH:用于广播网络Level0-2邻接; 在LAN(广播网络)和P2P(点到点网络)中形成邻接关系的过程稍有不同,所以使用的Hello报文也有些区别。 LAN hello报文格式 (1)Circuit Type:表示发送端接口的层次,Level-1 or Level-2; (2)System-ID:表示发送端路由器的系统ID;...
· Level-1路由器(只能创建level-1的LSDB) 同一区域 · Level-2路由器(只能创建level-2的LSDB) 不同区域 · Level-1-2路由器(路由器默认的类型,能同时创建level-1和level-2的LSDB) 跨区域 接口上改 [R1]int g0/0/1 [ ]isis circuit-level level-1 路由器上改 [R1-isis-1]is-level level-1 L1-...
isis circuit-type p2p ---将广播网络类型修改为P2P类型 ISIS建立邻居过程 ISIS建立邻居过程使用了三种类型的Hello数据包: P2P IIH:用于P2P网络建立level1或level2的邻居时使用 L1 LAN IIH:用于广播网络 Level-1邻接 L2 LAN IIH:用于广播网络 Level-2邻接 在不同的网络类型和level2直接建立邻居关系使用的hello...
不同区域的ISIS路由器的类型以及接口的类型,必须同时支持level-2 *不同区域之间是不发送L1的,因此可以对不同区域之间的链路接口做个小优化,即只收发L2的报文 命令: R2: int g0/0/0 isis circuit-level level-2 R3: int g0/0/1 isis circuit-level level-2 *骨干区域和非骨干区域 *骨干区域:level-2 *...
isisCircuitType INTEGER not-accessible 计数器所在链路的类型。点到点Hello报文包括Level-1和Level-2,由于在点到点链路上系统之间形成唯一的邻接关系,所以将点到点链路上的计数器合并到一个组里。 实现与MIB文件定义一致。 1.3.6.1.3.37.1.5.2.1.2 isisCircAdjChanges Couter32 read-only 链路上邻接状...
The isis circuit-type command simulates the network type of an IS-IS broadcast interface to a P2P interface. The undo isis circuit-type command restores the default network type of an IS-IS interface. By default, the network type of an interface is determined by the physical type of the ...
isis circuit-type level-2-only isis network point-to-point ! ! #配置ISIS远程LFA router isis TAC net 49.0000.0000.0001.00 is-type level-2-only metric-style wide fast-reroute per-prefix level-2 all fast-reroute remote-lfa level-2 mpls-ldp ...
isis circuit-type level-2-only isis password ccsp level-2 no shutdown 说明:(1)邻居验证:相互连接的路由器接口必须配置相同的密码,同时必须为L1和L2类型的邻居关系配置各自的验证,L1邻居验证的密码和L2邻居验证的密码可以不同。邻居验证通过命令“isis password”配置。在本实验中,R1和 R2之间的串行链路启用Lev...
如果协议中运行ISIS,那么在二层帧中Type封装Data-link header(OSI family0xFEFE) IS-IS header:first byte is 0x83 ES-IS herder:first byte is 0x82 CLNP herder:first byte is 0x81 Hello数据包分为三种类型: L1 LAN IS-IS Hello PDU(类型号15) ...
其中,广播网中的Level-1 IS-IS 使用Level-1 LAN IIH;广播网中的Level-2 IS-IS 使用Level-2 LAN IIH;非广播网络中则使用P2P IIH。它们的报文格式有所不同。 P2PIIH 中相对于 LAN IIH 来说,多了一个表示本地链路ID 的 LocalCircuit ID 字段,缺少了表示广播网中 DIS的优先级的 Priority 字段以及表示...