其中subnet网段要和br0的网段一致,还包括range ,broadcast-address,也要在同一网段 2、/etc/default/isc-dhcp-server 配置网口 cat /etc/default/isc-dhcp-server # Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server) # Path to dhcpd's config file (default: /etc/dhcp/dhcpd.co...
# Defaults for isc-dhcp-server (sourced by /etc/init.d/isc-dhcp-server)# Path to dhcpd's config file (default: /etc/dhcp/dhcpd.conf).#DHCPDv4_CONF=/etc/dhcp/dhcpd.conf#DHCPDv6_CONF=/etc/dhcp/dhcpd6.conf# Path to dhcpd's PID file (default: /var/run/dhcpd.pid).#DHCPDv4_...
sudo service isc-dhcp-server start ``` 要停止 isc dhcp 服务,可以使用以下命令: ``` sudo service isc-dhcp-server stop ``` 2.配置 dhcp 地址范围 使用以下命令配置 dhcp 地址范围: ``` sudo dhcpd-config -cf /etc/dhcp/dhcpd.conf -lf /var/lib/dhcp/dhcpd.leases -s <subnet> ``` 其中,...
然后在 /var/db下添加一个空文件dhcpd6.leases sudo touch /var/db/dhcpd6.leases 1. 查看网卡的信息为eth0 linye@ubuntu:/$ ifconfig eth0 Link encap:Ethernet HWaddr 00:0c:29:75:a2:91 inet addr:192.168.62.128 Bcast:192.168.62.255 Mask:255.255.255.0 inet6 addr: fe80::20c:29ff:fe75:a29...
#svccfg -s dhcp:ipv4 setprop config/listen_ifnames = e1000g0#svccfg -s dhcp:ipv4 refresh Listen on multiple interfaces To set the ISC DHCP server to listen on multiple interfaces, for examplee1000g[0|1|2|3], configure the ISC DHCP SMF as follows: ...
首先，我们可以使用‘ifconfig’工具来查看接口的配置情况。假设我们要测试的DHCP服务器仅配备了一块网络适配器（即网卡），且该网卡被命名为‘eth0’，那么执行以下命令即可查看其详细信息：ifconfig eth0 这条命令将显示与‘eth0’相关的网络配置详情，包括IP地址、子网掩码等关键信息。通过这些信息，我们可以进一步...
PXE搭建原理和过程之isc-dhcp-server # Defaults for isc-dhcp-server initscript # sourced by /etc/init.d/isc-dhcp-server # installed at /etc/default/isc-dhcp-server by the maintainer scripts # # This is a POSIX shell fragment # # Path to dhcpd's config file (default: /etc/dhcp/dhcpd...
# nano /etc/dhcp/dhcpd.conf 1. Configure DHCP Pools and Networks 当前这个例子是给用 VMWare 创建的虚拟服务器分配 IP 地址。***行显示是该网络的子网掩码。括号里面的内容是 DHCP 服务器应该提供给网络上面主机的所有选项。 ***行,range 172.27.60.50 172.27.60.254; 这一行显示的是,DHCP 服务在这个网...
setting delayed-ack to a non-zero value using the delayed-ack configuration statement in dhcpd.conf Any of those alternatives will prevent the problem from getting worse, but your server will still have to recover from those leases which were assigned to new clients but not recorded in non-vo...
the dhcpd man page. Information about the DHCP server lease database is in the dhcpd.leases man page. Server configuration documentation is in the dhcpd.conf man page as well as the dhcp-options man page. A sample DHCP server configuration is in the file server/dhcpd.conf.example. The ...