I like this. The PCIe could permit to connect a 2.5G NIC, which would be a good match with the 4 SATA for a file server. I hope that with this form factor there’s no need anymore for connecting a USB-TTL adapter to recover from a failed boot (likely the RS232 is there for ...
If the Station P3D Standard configuration does not match your needs, you could loosen two screws to slide out the bottom card and replace it with one of the cards for multiple displays, networking, audio, up to ten USB ports, or a range of RS232 and RS485 connectors....
Thin Client PC with CPU J4125/J4105/J1900 6COM RS232 RS485 VGA HD 2.0 6*USB Linux Win10 Desktop Nuc Mini PC Contact Now Chat with Supplier Quick View 21.5 Inch Industrial Embedded PC IP65 Waterproof Dustproof Capacitive...
(Old, dead and replaced by The Toaster Project & 5.0) The connector on the other end (d-sub 9 pin) is specific to vga, ega , serial ports rs-232 rs-485 .. and so on. The other connector isn't familiar to me, at first look I was thinking of Firewire but Google Image Search ...
rs232 via UART 16550 SPI used as main peripheral bus for: sd-card based mass storage PS/2-peripheral controller (keyboard, mouse) (ATmega8) RTC (Maxim DS1306) The Steckschwein is a work in progress, so there will be more than 64k RAM at some point. http://www.steckschwein.de/ Cheer...
peripheral, and audio interfaces such as VGA, SDI, Composite, DVI, DisplayPort, HDMI, USB 2.0/3.1, PS/2, serial formats such as RS232, Infrared, digital and analog audio, and more. They are used in applications such as broadcast, medical imaging, digital signage, and command and control ...
It is possible to use FTDI DB9-USB-M module (Mouser895-DB9-USB-RS232-M) instead of the serial port connector P3. This module contains RS232 to USB converter IC and provides a mini USB connector. (Alexey, thank you for this tip). It even might be possible to use FTDI DB9-USB-D5...
It is possible to use FTDI DB9-USB-M module (Mouser 895-DB9-USB-RS232-M) instead of the serial port connector P3. This module contains RS232 to USB converter IC and provides a mini USB connector. (Alexey, thank you for this tip). It even might be possible to use FTDI DB9-USB-D...
PiPo has released several mini PCs with touchscreen displays with products likePiPo X8orPiPo X9S, and now the company has launched PiPo X12 model based on an Intel Cherry Trail processor, with a larger 10.8″ display, an RS-232 port to connect a barc...
RS232/RS485 1x I2C, 1x SPI 7x Digital I/O Supply Voltage – +5V DC/ ±5% Dimensions – 80x50mm Operating Temperature Range – 0°C – +70°C; (opt. -20°C – +85°C) There are two variants of the board: PCOMnetA5-W13 and PCOMnetA5-LIN respectively pre-loaded with Window...