6- Noctua NT-H1 - 8.9W/m-K 7- Cooler Master Mastergel - 5W/m-K 8- C-14 Thermal Paste(Indian Brand) - 13.6W/m-K Expand The higher the rating, theoretically, the better it is, so 1, 8 and 2 in that order. Check ...
It sounds as if the thermal paste wasn't applied correctly, either too much or uneven can cause those symptoms. The Noctua is a good choice for a cooler. Thermal throttling, which happens around 93C IIRC doesn't cause a display to go off, and a thermal shutdown, which happens when exce...
Thermalright is known for its CPUheatsinksand range ofthermal pastes, but its latest product is aimed at novice system builders, or anyone who doesn't like that part of the PC build where you have to put thermal paste on a CPU and hope you used enough (or not too much). To solve...
I upgraded everything I could to squeeze as much performances as I could (SSD, 16go of ram, changed the thermal paste). I'm running Manjaro, but I had previously Fedora and Lubuntu. An idea of the size of the x230 A tower: My main computer for heavy computation, photoshop and ...
I even tried to re-paste with different methods, but it was zero difference. However, what I found is that Thermal Paste matters and NT-H1 isn't probably good enough for this CPU. My friend has similar build and he used Evolveo Ptero TC thermal paste with Silentium PC Fortis 5 Dual ...
For cooling, I’m using a Corsair H115i Elite with Noctua NT-H2 thermal paste. I previously used Kingpin KPX, but I discovered that it’s better suited for more exotic cooling solutions like LN2. When transcoding video, this CPU a little faster and draws about 30 watts less from the ...
Your mount could've been a bit off, thermal paste, ... The Thermalright is just a good cooler but the Freezer II 360 should perform slightly better. Is the cooler mounted as exhaust? If yes, that could explain higher temperatures. If you would mount the AIO ...
thermal paste wasn't applied correctly, either too much or uneven can cause those symptoms. the noctua is a good choice for a cooler. thermal throttling, which happens around 93c iirc doesn't cause a display to go off, and a thermal shutdown, which happens when exceeding 100c, will turn...
The thermal pasteused was the one that came pre-applied on the Asetek 645LT. We willcomparethe results of the Asetek 645LT 92 mm AIO to one of the main air competitors for SFF builds – the Noctua L9a. The fans will be set on theauto % rpm curvebecause we are interested in measurin...
The Fan/heatsink combo worked okay, but only after I installed a differentfan control packagethan the one included with the board. The included thermal paste—if you could call it that—came out more like a gooey snot than a paste, so I used a littleNoctua NT-H2instead. The fan is no...