(1)单播地址( Unicast Address):标识一个接口,目的地址为单播地址的报文会被送到被标识的接口;分为:可聚合全球单播地址、链路本地单播地址、站点本地单播地址; (2)组播地址( Multicast Address):标识多个接口,目的地址为组播地址的报文会被送到被标识的所有接口; (3)任播地址( Anycast Address):标识多个接口,目...
二、Multicast address format多播地址 格式/有些地方 也翻译为 组播[edit] Further information:Multicast address § IPv6 Multicastaddresses are formed according to several specific formatting rules, depending on the application. 多播地址的结构格式 要看基体的格式规则而定,格式规则取决于特定的应用。 General ...
If multicast addresses of packets are in the SSM group address range, IPv6 PIM-SM uses the SSM model to provide multicast services. The IPv6 PIM-SSM model is efficient and simplifies the multicast address allocation process. It is applicable when a group has only one specific source. If mul...
Run multicast ipv6 routing-enable The IPv6 multicast routing function is enabled. Run interface interface-type interface-number The interface view is displayed. Run pim ipv6 sm IPv6 PIM-SM is enabled.(Optional) Configuring an SSM Group Policy Context By default, the IPv6 address rang...
(1)静态路由:ipv6 route ipv6-prefix/prefix-length {ipv6-address | interface-type interface-number [ipv6-address]} [administrative-distance] [administrative-multicast-distance] | unicast | multicast][next-hopaddress] [tagtag] 直连静态路由,递归静...
Unicast address: A packet is delivered to one interface. Multicast address: A packet is delivered to multiple interfaces. Anycast address: A packet is delivered to the nearest of multiple interfaces. The distance between interfaces is defined by the routing cost. ...
ipv6 multicast boundary { ipv6-group-address prefix-length | scope { scope-id | admin-local | global | organization-local | site-local } } 缺省情况下,接口上未配置任何IPv6组播组的转发边界。 1.8 处理RPF检查失败的IPv6组播数据报文 1.8.1 配置在所有vlan内泛洪RPF检查失败的IPv6组播数据报文 1....
Multicast addressA packet is delivered to multiple interfaces. Anycast addressA packet is delivered to the nearest of multiple interfaces. The distance between interfaces is defined by the routing cost. IPv6 unicast addresses have the following possible scopes: ...
1.1.32 ipv6 address prefix-number 1.1.33 ipv6 bandwidth-based-sharing 1.1.34 ipv6 fib max-number 1.1.35 ipv6 hop-limit 1.1.36 ipv6 hoplimit-expires enable 1.1.37 ipv6 icmpv6 echo-reply traffic-priority 1.1.38 ipv6 icmpv6 error-interval 1.1.39 ipv6 icmpv6 multicast-echo-reply enable ...
s unicast and anycast addresses. A solicited-node multicast address is formed by taking the low-order 24 bits of an address (unicast or anycast) and appending those bits to the prefix FF02:0:0:0:0:1:FF00::/104 resulting in a multicast address in the range FF02:0:0:0:0:1:FF00:...