K3s fails to start in dual stack mode with message "IPv6 was enabled but no IPv6 address was found on node" even though the node has an IPv6 address. Steps To Reproduce: Error occurred first after upgrading (in the stable channel) from 1.25 to 1.26. Downgrade back to 1.25 exhibits the...
- IPv6 enabled network/router (SLAAC configured with public prefix)- Ideally only one DUT in that networkSteps to reproduce:1) verify IPv6 generally works after a clean reboot: https://www.whatismyip.com/(Check that you have an IPv6)and„ipconfig“ on commandline showing the same ...
ND DAD is enabled, number of DAD attempts: 1ND reachable time is 30000 millisecondsHosts use stateless autoconfig for addresses. A Windows10 computer located on the same network gets a gobal unicat ipv6 address with autoconfiguration. The router does not support ipv6 dhcp for address configurati...
anycast tunel on a DD-WRT enabled box, say) will mean that 6to4 IPv6 will only be used to communicate to a server if the server is having a 6to4 adress too (ie: 2002: prefix on its address) or if there is no IPv4 address assigned to the server name (ie: no A but an AAAA)....
I wanted to start mailu on my raspberry with Debian 11 but the imap service refuses to start. There are various containers running already on my pi and I've also tested docker-mailserver which is working fine...so no clue why it's failing here? Is it an issue in version 2.0? Replica...
这个镜像站点已不可信,建议改用test-ipv6.com。 可向运营商咨询如何使用 IPv6,实现最佳的网络性能。[更多信息] 你的DNS 服务器(可能由运营商提供)已经接入 IPv6 互联网了。 IPv6 状况评分 10/10此分数表示你的系统对 IPv6 的支持程度和稳定性
Hi, calls to URLSession for an IPv6 only domain (i.e. only an AAAA DNS record) within my app are failing even though the same domain name works in Safari. This is on a device with both an IPv4 and IPv6 connection when iCloud Private Relay is enabled and when it is not....
IPv6 is enabled, link-local address is FE80::B2FA:EBFF:FED6:4320 No Virtual link-local address(es): Interface is unnumbered. Using address of Loopback0 No global unicast address is configured Joined group address(es): FF02::1 FF02::2 FF02::1:FFD6:4320 MTU is 1492 bytes ICMP error...
In other words, if the router is working and doing what the purchaser wants it to do ("fit for purpose"), does it matter if it doesn't meet some new definition defined by a third-party standards body? I don't know the answer to that, but I guess we would have to await the ...
By default, IPv6 is not enabled for an IS-IS process. (Optional) Set a level for the device. is-level { level-1 | level-1-2 | level-2 } By default, the level of the device is Level-1-2. You are advised to set a level for the routing device based on network planning....