[Switch-Vlan-interface2] ipv6 dhcp select server [Switch-Vlan-interface2] ipv6 dhcp server allow-hint preference 255 rapid-commit 4. 验证配置 # 完成上述配置后,查看VLAN接口2上的DHCPv6服务器配置信息。 [Switch-Vlan-interface2] display ipv6 dhcp server interface vlan-interface 2 Using pool: glob...
[Switch-dhcp6-pool-1] quit # 配置VLAN接口2工作在DHCPv6服务器模式,并在该接口使能期望前缀分配和前缀快速分配功能,并将优先级设置为最高。 [Switch] interface vlan-interface 2 [Switch-Vlan-interface2] ipv6 dhcp select server [Switch-Vlan-interface2] ipv6 dhcp server allow-hint preference 255 rapid...
dns-server ipv6-address 10.5.2 在地址池中引用选项组 ipv6 dhcp pool name option-group number 10.6 地址引用 10.6.1 地址引用方式 a、ipv6 dhcp server { allow-hint | preferencee value | rapid-commit } * 缺省优先级为0,不支持快速分配 b、ipv6 dhcp server apply pool name { allow-hint | pr...
配置命令如下: #interface GigabitEthernet0/0 ipv6 dhcp select server ipv6 dhcp server allow-hint rapid-commit ipv6 address 1::1/64 ipv6 nd autoconfig other-flag undo ipv6 nd ra halt 然后配置DHCPv6服务器,供客户端获取除前缀外的其他网络配置参数。 #ipv6 dhcp pool 6 network 1::/64 dns-se...
ipv6 dhcp server apply pool 6 allow-hint preference 255 rapid-commit # [core-S5500-IRF]dis ipv6 interface vlan 80 Vlan-interface80 current state :UP Line protocol current state :UP IPv6 is enabled, link-local address is FE80::86D9:31FF:FEC3:CF81 ...
interface GigabitEthernet0/0 port link-mode route description LAN-interface ip address 192.168.10.1 255.255.255.0 tcp mss 1280 ipv6 forwarding undo dhcp select server ipv6 dhcp select server ipv6 dhcp server apply pool servers allow-hint rapid-commit ipv6 dhcp server allow-hint rapid-commit ipv6...
[5800-Vlan-interface200] ipv6 nd autoconfig other-flag //邻居发现自动配置use DHCP for non-address config [5800-Vlan-interface200] ipv6 address 2001:77:77:77::1/64 //配置用ipv6地址段 [5800-Vlan-interface200] ipv6 dhcp server apply pool 1 allow-hint preference 255 rapid-commit //调用...
[5800-Vlan-interface200] ipv6 nd autoconfig other-flag //邻居发现自动配置use DHCP for non-address config [5800-Vlan-interface200] ipv6 address 2001:77:77:77::1/64 //配置用ipv6地址段 [5800-Vlan-interface200] ipv6 dhcp server apply pool 1 allow-hint preference 255 rapid-commit //调用...
日志看似乎已经拿到ipv6地址和前缀。你把ipv6 dhcp client里面request address去掉，只留 prefix 试试。
ipv6 nd autoconfig other-flag //开启设备为PC分配除地址外的其他参数 ipv6 address 2001:DA8:23E:1::1/64 //配置给PC分配64位前缀 ip address 111.1.1.2 255.255.255.0 ipv6 dhcp server apply pool 1 allow-hint preference 255 rapid-commit //应用IPv6地址池 ...