For Apple iPhone 12 Mini Battery Sticker Replacement - Grade S+ Sku: ESAPP2011160001 $0.24 For Apple iPhone 12 Mini LCD Screen and Digitizer Assembly with Frame Replacement - Black - Grade S+ Sku: ESAPP2011240001-23 $80.79 For Apple iPhone 12 Mini SIM Card Tray Replacement (Single SIM ...
Remove the repair tray from the battery press. Reinstall the following part to complete reassembly: Display Gently shake the iPhone. If the battery sounds loose, remove thedisplayand thebattery. Then complete battery reassembly with another replacement battery. ...
If you’re installing a replacement display, peel the protective liner from the top and underside of it. Warning:Inspect the enclosure for loose or extra screws and small parts, which can damage the battery and cause safety issues. Place the enclosure in the repair tray with the Lightning con...
Display Tools 5.4-inch repair tray ESD-safe tweezers JCIS bit Nitrile or lint-free gloves Nylon probe (black stick) Torque driver (gray, 0.55 kgf cm) Caution To avoid damaging the lenses, don’t touch the TrueDepth camera assembly or nearby parts. ...
6.1-inch repair tray ESD-safe tweezers Micro stix bit Nitrile or lint-free gloves Nylon probe (black stick) Torque driver (black, 0.35 kgf cm) Caution To avoid damaging the lenses, don’t touch the TrueDepth camera assembly or nearby parts. ...
Removal Place the enclosure in the repair tray with the Lightning connector facing the cutout. Use a torque driver and the Micro stix bit to remove the five trilobe screws from the camera cowling in the order shown. Hold the camera cowling in place as you remove the center screw (5). Se...
Insert the suction cup into the repair tray. Place the iPhone into the repair tray with the Lightning connector facing the cutout. Gently press along the edges of the display to secure it to the suction cup. Use a torque driver and the JCIS bit to remove the four crosshead screws from th...
Slide the repair tray back and forth through the battery press three times to adhere the battery to the enclosure. Flip up the red lever. Remove the repair tray from the battery press. Hold the edges of the protective cover. Pull the release tabs on the protective cover to remove the cove...
Place the enclosure in the repair tray with the Lightning connector facing the cutout. Use a torque driver and the screw super bit to remove the super screw from the upper right corner of the Taptic Engine . Set aside the screw. Use ESD-safe tweezers to grasp the bottom right battery adhe...
This procedure requires a replacement battery shim, which is available with a replacement speaker, Taptic Engine , or battery. Removal Place the enclosure in the repair tray with the Lightning connector facing the cutout. Use ESD-safe tweezers to grasp the bottom right battery adhesive tab. Gently...