iPerf3 runs as client and server iPerf3 runs as both a client and a server on two machines, at either end of a data link. This could be a virtual private network (VPN), wide area network (WAN), or just inside your home network. One machine takes on the role of server, and the ...
It may be that for some reason, e.g. because of network loading by other traffic, there are "windows of time" when packets can pass between the client and server. Since UDP does not retry sending, there is a lower chance that it will send when such "window" is open. If you still ...
It will send the given number of packets without pausing, even if that temporarily exceeds the specified throughput limit. Setting the target bitrate to 0 will disable bitrate limits (particularly useful for UDP tests). This throughput limit is implemented internally inside iperf3, and is available...
(to me) whether this restriction is implemenation-specific or defined in the DTLS RFC. In any case, testing reveals that WolfSSL will refuse to send any DTLS traffic wheniperf3's blocksize is set any higher than 8092 bytes. Until this is resolved, clients running in UDP mode should use ...
它支持调整与时序、缓冲区和协议（TCP、UDP、带有 IPv4 和 IPv6 的 SCTP）相关的各种参数。对于每次...
Withiperf, you can tune several parameters associated with timing, buffers, and protocols such as TCP, UDP, and SCTP. It comes in handy fornetwork performance tuningoperations. In order to acquire maximum or rather improved network performance, you need to increase the throughput as well as the...
Sanity checks for UDP send sizes have been added (#390), and existing checks on the --window option have been improved (#557). The TCP rttvar value is now available in the JSON output (#534), as are the socket buffer sizes (#558). ...
Server will close the socket after -t seconds of no traffic See also https://sourceforge.net/projects/iperf2/ iPerf 2 user documentation Tuning a TCP connection Tuning a UDP connection Running multicast servers and clients ...
It will send the given number of packets without pausing, even if that temporarily exceeds the specified throughput limit. Setting the target bitrate to 0 will disable bitrate limits (particularly useful for UDP tests). This throughput limit is implemented internally inside iperf3, and is available...
In any case, testing reveals that WolfSSL will refuse to send any DTLS traffic when iperf3's blocksize is set any higher than 8092 bytes. Until this is resolved, clients running in UDP mode should use the -l flag to specify a blocksize of less than or equal to 8092B Future Work / ...