在一次性模式下,这是服务器在退出前等待的秒数。 --server-bitrate-limit n[KMGT] 在服务器端设置一个限制,如果客户端指定的测试超过每秒n位,或者客户端发送或接收的平均数据(包括所有数据流)大于每秒n位时,这将导致测试中止。默认限制为零,这意味着没有限制。默认情况下,平均数据速率的间隔为5秒,但可以通过在...
第二列 Transfer:在 Interval 时长里,传输的数据量 第三列 Bitrate:传输速率 第四列 Jitter:网络抖动,连续发送数据包时延差值的平均值,越小说明网络质量越好 第五列 Lost/Total Datagrams:丢失的数据包与发送的总数据包 === [root@localhost ~]# [root@localhost ~]# cat /lib/systemd/system/iperf3@.ser...
--connect-timeout # timeout for control connection setup (ms) -b, --bitrate #[KMG][/#] target bitrate in bits/sec (0 for unlimited) (default 1 Mbit/sec for UDP, unlimited for TCP) (optional slash and packet count for burst mode) 【限制测试带宽。UDP 默认为 1Mbit/秒,TCP 默认无限...
Bitrate:传输速率,以比特每秒(bps)为单位。 Retr:在测试期间发生的重传次数。 Sender:表示此行所列出的结果来自iperf3客户端。 Receiver:表示此行所列出的结果来自iperf3服务器。 根据上述iperf3测试的结果,从192.168.26.6到192.168.26.1的连接中,传输速率大约是23.4 Gbits/sec。整个测试持续了10秒钟,期间发送了27.2...
[ID]IntervalTransferBitrateJitterLost/TotalDatagrams [5]0.00-10.00sec1.25MBytes1.05Mbits/sec0.000ms0/943(0%)sender [5]0.00-10.30sec1.24MBytes1.01Mbits/sec9.435ms8/942(0.85%)receiver iperfDone. server端 [ID]IntervalTransferBitrateJitterLost/TotalDatagrams ...
1. 写在前面iPerf(Internet Performance Working Group ) 是专业的网络测试工具,基于 TCP/IP 和 UDP/IP 协议,测量两个节点之间 TCP 和 UDP 端口的网络带宽,…
(ms) -b, --bitrate #[KMG][/#] target bitrate in bits/sec (0 for unlimited) (default 1 Mbit/sec for UDP, unlimited for TCP) (optional slash and packet count for burst mode) --pacing-timer #[KMG] set the timing for pacing, in microseconds (default 1000) -t, --time # time in...
iperf3 -c server_ip -p port -b bitrate # 设置带宽测试 iperf3 -c server_ip -p port -i interval # 设置测试时间间隔 iperf3 -c server_ip -p port -t time # 设置测试时间 iperf3 -c server_ip -p port -R # 启用实时带宽报告 ``` 其中,`-b` 表示设置带宽测试的比特率,`-i` 表示设置...
Summary iperf is a tool for active measurements of the maximum achievable bandwidth on IP networks. It supports tuning of various parameters related to timing, protocols, and buffers. For each test it reports the measured throughput / bitrate, loss, and other parameters. ...
[ ID] Interval Transfer Bitrate Retr Cwnd [ 5] 0.00-1.00 sec 78.2 MBytes 656 Mbits/sec 0 67.0 KBytes [ 5] 1.00-2.00 sec 74.6 MBytes 626 Mbits/sec 0 67.0 KBytes [ 5] 2.00-3.00 sec 79.3 MBytes 665 Mbits/sec 0 67.0 KBytes