针对你提出的“ip address mismatch, certificate is not valid for”错误,以下是一些详细的解决步骤和建议: 确认错误信息: 这个错误表明SSL证书验证失败,原因是证书上的IP地址与实际访问的IP地址不一致。 检查证书上的IP地址: 登录到你的服务器,检查SSL证书的配置。 确认证书文件(如.crt或.pem)中列出的IP
5 13:05:28 kernel: ol_ath_download_firmware :First OTP download and Execute is good address:0x...
但我用这台有mqttfx的相同电脑用python paho.mqtt去发布数据,就出现以下错误 ssl.SSLCertVerificationError: [SSL: CERTIFICATE_VERIFY_FAILED] certificate verify failed: IP address mismatch, certificate is not valid for ‘192.168.1.54’. (_ssl.c:1123) 所以证书中IP应该怎样写?新手,谢谢你的帮助 t1ger 2...
The chain of trust is only one aspect of the validity of a certificate. What you're running into- effectively a name mismatch (you call it 1.2.3.4, the cert says it's valid for some.host.example.com)- is another very important validity check. ...
Whenever I attempt to connect (via SslStream), the certificate validation reports a RemoteCertificateNameMismatch. If I use the name in the DNS.1 section of the certificate SAN it connects. I also discovered that if I put the IP address in the SAN as a DNS entry instead of an IP ...
REASON(TCPIPSERVICE_MISMATCH) A capability exchange request was received for an IPCONN which is defined as using a different tcpipservice from that used for the capability exchange. REASON(TCPIPSERVICE_NOT_FOUND) Either acquire_connection has been called for an ipconn but the tcpipservice named...
Not a constructor form Not a primitive form Out of memory Overflow SNMP ps_error messages End of file End of file reading extended ID End of file reading extended length Indefinite length in primitive form Length Mismatch Out of memory Overflow in ID Overflow in length XXX ...
The DHCP server marks the address as "BAD_ADDRESS" ... after some time, as a result, the DHCP scope may run out of addresses. Conditions:This problem is seen with the following: * controller is a 9800 (not AireOS)* all AP models.* DHCP server is Microsoft Windows 2008 or 2...
The DHCP server marks the address as "BAD_ADDRESS" ... after some time, as a result, the DHCP scope may run out of addresses. Conditions:This problem is seen with the following: * controller is a 9800 (not AireOS)* all AP models.* DHCP server is Microsoft Windows...
If the hostname or IP address that is defined on the Cisco Unified OS Administration and Cisco Unified CM Administration pages do not match, the applications are unable to fetch the correct phone status. Also, due to certificate mismatch, TLS ...