IOCTL_SERIAL_SET_RTS请求将 RTS (请求设置为发送) 。 如果设备的握手流控制配置为自动使用 RTS,则客户端无法清除或设置 RTS。 客户端可以使用IOCTL_SERIAL_CLR_RTS请求来清除 RTS。 主要代码 IRP_MJ_DEVICE_CONTROL 输入缓冲区 无。 输入缓冲区长度
IOCTL_SERIAL_CLR_RTS:清除串口的RTS信号。 IOCTL_SERIAL_GET_CONFIG:获取串口的配置。 IOCTL_SERIAL_SET_CONFIG:设置串口的配置。 IOCTL_SERIAL_SET_BREAK_ON:在串口上发送BREAK信号。 IOCTL_SERIAL_SET_BREAK_OFF:停止发送BREAK信号。 IOCTL_SERIAL_SET_WAIT_MASK:设置等待面具。 IOCTL_SERIAL_WAIT_ON_MASK:等待...
示例5: setRTS ▲点赞 1▼ defsetRTS(self, level=1):"""Set terminal status line: Request To Send"""ifself.fdisNone:raiseportNotOpenErroriflevel: fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_RTS_str)else: fcntl.ioctl(self.fd, TIOCMBIC, TIOCM_RTS_str) 开发者ID:mtyka,项目名称:grooviks-cube,...
# 需要导入模块: import FCNTL [as 别名]# 或者: from FCNTL importioctl[as 别名]defsetRTS(self, level=1):"""Set terminal status line: Request To Send"""ifnotself._isOpen:raiseportNotOpenErroriflevel: fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_RTS_str)else: fcntl.ioctl(self.fd, TIOCMBIC, T...
(or domain - the cell) */ struct iw_freq freq; /* frequency or channel : * 0-1000 = channel * > 1000 = frequency in Hz */ struct iw_param sens; /* signal level threshold */ struct iw_param bitrate; /* default bit rate */ struct iw_param rts; /* RTS threshold threshold */...
IOCTL_SERIAL_GET_DTRRTS [X] [MS-RDPESP]0x001b007c IOCTL_SERIAL_LSRMST_INSERT [X] [MS-RDPESP]0x001b0080 IOCTL_SERIAL_CONFIG_SIZE [X] [MS-RDPESP]0x001b0084 IOCTL_SERIAL_GET_COMMCONFIG [X] 0x001b0088 IOCTL_SERIAL_SET_COMMCONFIG ...
(or domain - the cell) */ struct iw_freq freq; /* frequency or channel : * 0-1000 = channel * > 1000 = frequency in Hz */ struct iw_param sens; /* signal level threshold */ struct iw_param bitrate; /* default bit rate */ struct iw_param rts; /* RTS threshold threshold */...
*//* Other parameters useful in 802.11 andsome other devices */#defineSIOCSIWRATE 0x8B20/* 设置默认传输速率(bps) */#defineSIOCGIWRATE 0x8B21/* 获取默认传输速率 (bps) */#defineSIOCSIWRTS 0x8B22/* 设置 RTS/CTS 的临界值(bytes) */#defineSIOCGIWRTS 0x8B23/* 获取 RTS/CTS 的临界值 (...
def setRTS(self, level=1): """Set terminal status line: Request To Send""" if self.fd is None: raise portNotOpenError if level: fcntl.ioctl(self.fd, TIOCMBIS, TIOCM_RTS_str) else: fcntl.ioctl(self.fd, TIOCMBIC, TIOCM_RTS_str) Example #10 0 Show file File: devfs.py Project...
(bps) */#define SIOCSIWRTS 0x8B22 /* set RTS/CTS threshold (bytes) */#define SIOCGIWRTS 0x8B23 /* get RTS/CTS threshold (bytes) */#define SIOCSIWFRAG 0x8B24 /* set fragmentation thr (bytes) */#define SIOCGIWFRAG 0x8B25 /* get fragmentation thr (bytes) *//* Encoding stuff (...