错误检查 0xFE:BUGCODE_USB_DRIVER 错误检查 0xFF:RESERVE_QUEUE_OVERFLOW 错误检查 0x100:LOADER_BLOCK_MISMATCH 错误检查 0x101:CLOCK_WATCHDOG_TIMEOUT 错误检查 0x102:DPC_WATCHDOG_TIMEOUT 错误检查 0x103:MUP_FILE_SYSTEM 错误检查 0x104:AGP_INVALID_
Stampa Controllo bug 0x1CE: INVALID_KERNEL_STACK_ADDRESS Articolo 20/06/2023 Importante Questo articolo è destinato ai programmatori. Se si è un cliente che ha ricevuto un codice di errore della schermata blu durante l'uso del computer, vedereRisolvere gli errori della schermata b...
The system view is displayed. Run clock source-lost holdoff-time value The hold time of a clock source after its signals become invalid is configured. By default, the hold time of a clock source after its signals become invalid is 1000 ms. Run commit The c...
原因7:The in-position board type conflicts with the pre-configured board type.(在位单板与预配置的逻辑单板冲突。) 原因8:The clock signals of the board were incorrect.(单板时钟信号故障。) 原因9:The board does not support some configurations and cannot register.(当前单板与配置冲突,不允许注册。) ...
错误检查 0xFE:BUGCODE_USB_DRIVER 错误检查 0xFF:RESERVE_QUEUE_OVERFLOW 错误检查 0x100:LOADER_BLOCK_MISMATCH 错误检查 0x101:CLOCK_WATCHDOG_TIMEOUT 错误检查 0x102:DPC_WATCHDOG_TIMEOUT 错误检查 0x103:MUP_FILE_SYSTEM 错误检查 0x104:AGP_INVALID_ACCESS ...
INVALID_SOFTWARE_INTERRUPT錯誤檢查的值為 0x00000007。 這個錯誤檢查非常不常出現。 解決方案 !analyze偵錯延伸模組會顯示錯誤檢查的相關資訊,有助於判斷根本原因。 重要 本文適用于程式設計人員。 如果您是在使用電腦時收到藍色螢幕錯誤碼的客戶,請參閱針對藍色畫面錯誤進行疑難排解。
The TIMER_OR_DPC_INVALID bug check has a value of 0x000000C7. This is issued if a kernel timer or deferred procedure call (DPC) is found somewhere in memory where it is not permitted.
The SET_OF_INVALID_CONTEXT bug check has a value of 0x00000030. This indicates that the stack pointer in a trap frame had an invalid value.
The SET_OF_INVALID_CONTEXT bug check has a value of 0x00000030. This indicates that the stack pointer in a trap frame had an invalid value.
Bug Check 0xFE: BUGCODE_USB_DRIVER Bug Check 0xFF: RESERVE_QUEUE_OVERFLOW Bug Check 0x100: LOADER_BLOCK_MISMATCH Bug Check 0x101: CLOCK_WATCHDOG_TIMEOUT Bug Check 0x102: DPC_WATCHDOG_TIMEOUT Bug Check 0x103: MUP_FILE_SYSTEM Bug Check 0x104: AGP_INVALID_ACCESS Bug Check 0x105: AGP_...