specifically, the hardware would take the form of an Arduino Mega 2560 with a USB Host Shield. There was plenty of code and examples that showed how you could read the mouse position and clicks from the Arduino, but [rehsd] still had to figure out a way to get that information into th...
A HUGE thanks to Jan Baeyens ("jantje"), who has graciously DONATED an Arduino Mega ADK to the PinChangeInt project!!! Wow, thanks Jan! This makes the 2560-based Arduino Mega a first class supported platform- I will be able to test it and verify that it works. ...
A timer can generate different types of interrupts. The register and bit definitions can be found in the processor data sheet (Atmega328 or Atmega2560) and in the I/O definition header file (iomx8.h for Arduino, iomxx0_1.h for Arduino Mega in the hardware/tools/avr/include/avr folder)...
This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important feature is they're ISR-based ...
Open thearduino_LIS3DH_inertialwakeupdetectionSimulink model. The model is preconfigured to work with Arduino Mega 2560. If you are using a different Arduino board, change the hardware board by performing the following steps: 1. Navigate toModeling>Model Settingsto open the Configuration Parameters ...
References https://forum.arduino.cc/t/difference-in-time-between-interrupt-start-on-mega-2560-and-nano-every-4809/897591 mrrwa/NmraDcc#57 https://github.com/SpenceKonde/DxCore/blob/master/megaavr/extras/Ref_Interrupts.md
Official Arduinos | PCINT | Uno/Nano/Mini | Mega/2560 | Leonardo/Micro | HL2 (8/16/32u2) | | --- | --- | --- | --- | --- | | 0 | 8 (PB0) | 53 SS (PB0) | SS (PB0)* | 0 SS (PB0)* | | 1 | 9 (PB1) | 52 SCK (PB1) | SCK (PB1) | 1 SCK (P...
based Arduinos, and some ATmega32u4 and Sanguinos. It adds pin change interrupts, giving a way for users to have interrupts drive off of any pin (ATmega328-based Arduinos), by the Port B, J, and K pins on the Arduino Mega and its ilk, and on the appropriate ports (including Port...
Official Arduinos | PCINT | Uno/Nano/Mini | Mega/2560 | Leonardo/Micro | HL2 (8/16/32u2) | | --- | --- | --- | --- | --- | | 0 | 8 (PB0) | 53 SS (PB0) | SS (PB0)* | 0 SS (PB0)* | | 1 | 9 (PB1) | 52 SCK (PB1) | SCK (PB1) | 1 SCK (P...
This library enables you to use Interrupt from Hardware Timers on an Arduino, such as Nano, UNO, Mega, etc. It now supports 16 ISR-based timers, while consuming only 1 hardware Timer. Timers' interval is very long (ulong millisecs). The most important fe