I have a XXV710-DA2 NIC that came with 8.40 firmware: ethtool -i ens35f0 driver: i40e version: 2.20.12 firmware-version: 8.40 0x8000b1fb 20.5.16 expansion-rom-version: bus-info: 0000:51:00.0 supports-statistics: yes supports-test: yes suppo...
I wish to create virtual function on the NIC which i have, XXV710DA2 to support SR-IOV. Currently it has 7.10 firmware and does not virtualization. When i tried upgrading it using the Intel's nvmupdate tool it showed update not available. but there is 9.30 latest firmware version for ...
Config file doesn't have any OROM components specified for device 'XXV710'. Tool will use current device's combo set for the OROM update.Inventory[00:018:00:00]: Intel(R) Ethernet Network Adapter XXV710-2Flash inventory started.Shadow RAM inventory started.Alterna...
When I have read the datasheet (Intel® Ethernet Controller X710/XXV710/XL710 Datasheet) of the device it is stated as below in section 3.4.1.2 A blank Flash programming mode is provided (besides the normal programming mode previously mentioned in item 2.) where the Flash can be ...
VMWare recommends for ESXi 8.0 and XL710-QDA1 to use drivers from Intel version 2.4.2.0 and firmware 9.1 I installed this driver and upgraded NIC firmware. NIC PF driver was configured in SR-IOV mode with 8 VFs. Virtual Machine running on this host is Ub...
VMWare recommends for ESXi 8.0 and XL710-QDA1 to use drivers from Intel version 2.4.2.0 and firmware 9.1 I installed this driver and upgraded NIC firmware. NIC PF driver was configured in SR-IOV mode with 8 VFs. Virtual Machine running on this host is U...
VMWare recommends for ESXi 8.0 and XL710-QDA1 to use drivers from Intel version 2.4.2.0 and firmware 9.1 I installed this driver and upgraded NIC firmware. NIC PF driver was configured in SR-IOV mode with 8 VFs. Virtual Machine running on this host is...
VMWare recommends for ESXi 8.0 and XL710-QDA1 to use drivers from Intel version 2.4.2.0 and firmware 9.1 I installed this driver and upgraded NIC firmware. NIC PF driver was configured in SR-IOV mode with 8 VFs. Virtual Machine running on this host is Ubuntu 22.10 with kernel 5.1...
VMWare recommends for ESXi 8.0 and XL710-QDA1 to use drivers from Intel version 2.4.2.0 and firmware 9.1 I installed this driver and upgraded NIC firmware. NIC PF driver was configured in SR-IOV mode with 8 VFs. Virtual Machine running on this host is Ubuntu 22.10 with...
I will have this issue checked if it is possible to downgrade the firmware to 8.70. Please give us 2 to 3 working days to provide an update on this. Thank you and stay safe. Best regards, Michael L. Intel® Customer Support Traducir 0 kudos Copiar ...