Snake the pipe through the hole(s), leaving at leastsix to eight feet of excess tubing behind the refrigerator. Feed the tubing from behind the refrigerator through the hole to wherever your saddle valve is. If you are using copper, do not straighten the tubing... leave it coiled and fee...
A: Water main shut-off Step 2. Locate the cold potable water pipe (1). B: Without space Step 3. Follow the water pipe installation instructions to perform the installation. Step 4. Once the connection is completed, open the main water valve and dispense approximately 3 liters of w...
Top Left:an output air adapter box I made to channel the air out to the right places.Right:A prefab filter/input box I bought off of my neighbor (who is also a builder).Bottom:You can see where the two things fit into place along with the horizontally installed heat pump air handler....
The pipe is slid into the fitting (in this case a toilet shutoff valve) and the nut is tightened down. As the nut is tightened, the compression ring is pressed into the seat, causing it to compress against the pipe and the compression nut, providing a watertight connection. Usually, ...
You will need to install a cold water line for either a refrigerator ice maker or an under-counter ice maker. 2 Shut off the water and drain the pipe. Turn off the main water valve before starting your project by turning it clockwise. This valve will likely be located on a perimeter wa...