A311D,Fenix 0.8.2 Ubuntu 18.04.3 LTS Linux 5.5.0-rc2 sudo insmod galcore.ko insmod: ERROR: could not insert module galcore.ko: Invalid module format
insmod: ERROR: could not insert module gtp5g.ko: Operation not permitted Makefile:16: recipe for target 'install' failed make: *** [install] Error 1Owner PrinzOwO commented Jun 5, 2020 Hi @kk8421 , You need to run this command with root permission. Use sudo Change the user to root...
insmod g_z..[ 159.499182] udc fc000000.usb: failed to start zero: -2insmod: ERROR: could not insert module g_ze
Attempts to load the module manually result in : ERROR: could not insert module /lib/modules/r1soft/hcpdriver-cki-XXX.ko: Operation not permitted The following error can also be found in Syslog / Messages log : kernel: hcp: ERROR: Could not init mrf hash!
vmap allocation for size 16785408 failed: use vmalloc=<size> to increase size. insmod: can't insert 'simp-blkdev.ko': Cannot allocate memory 出错原因也很简单,它的意思是不能分配16785408这么大的空间,所以失败,回到simp_blkdev.c上,原来我们在这里分配的内存空间是16M,当然就出错啦,要知道嵌入式里面的...
遇到相同问题20.04 LTS与5.13仍然有效，但5.15无效。
出现了:insmod: ERROR: could not insert module dnw_usb.ko: Invalid module format 错误 对于我这个小白来说,太难了,搞了好几天,试了好多种方法都不行,但最终搞出来了!!! 经过这几天查资料,说是这个dnw_usb.ko文件是以前版本的内核编译的,跟现在的内核版本不同,所以要报错。
遇到相同问题20.04 LTS与5.13仍然有效，但5.15无效。
insmod: ERROR: could not insert module module.ko: Required key not available 我所使用的系统为 Ubuntu 18.04,Linux Kernel 为 4.15.0-32-generic。 出现此问题的原因是,Ubuntu Kernel 使用 EFI_SECURE_BOOT_SIG_ENFORCE 内核配置,这样会阻止内核载入第三方模块。
we want to use a newer kernel from linux-davinci (newer then 3.6. rc 7). But if we want to insmod syslink.ko we get the message: syslink: Unknown symbol final_putname (err 0) insmod: can't insert '/lib/modules/3.10.0/kernel/drivers/dsp/syslink.ko': unknown symbol in module or...