1、重启电脑，开机快速按键盘上的F8键，出现下面界面时，选择进入安全模式。2、进入安全模式后点击鼠标右键，选择菜单上的屏幕分辨率。3、选择合适电脑的分辨率，例如改小分辨率，设置完成后重启电脑。4、重启电脑进入系统后，可以发现正常显示了，如果屏幕比例显示不对，可以再次更改分辨率。
意思为：输入信号的范围设置1600x900-60hz 打开安装目录设置一下 你可能需要重新安装 如果不行 请重新下载
CentOS7 安装 报Input Signal Out of Range Change Settings to 1600X900 - 60HZ,程序员大本营,技术文章内容聚合第一站。
信号超出范围,把分辨率设置为1600X900
超出了你的显示器支持的最大分辨率，把极品的分辨率调低点就没事了。20寸的显示器，最佳分辨率就是1600X900。
启动计算机的时候,按住F8选择进入安全模式,进入后将显示器分辨率跳到1024X768就好了。
“Input signal out of range”（输入信号超出范围）这是主机设置超过LCD的支持范围，需要更改分辨率和刷新率；20英寸的最佳分辨率为1680*1050，刷新率一般取75Hz以下。连安全模式都进不了，这个不是系统的问题，而是分辨率调的太高了，普通液晶根本就达不到那么高的分辨率，最好找台纯平显示器，因为纯平...
Input Signal Out Of Range Change Settings to 1600x900 60Hz I don't understand what that means I'm so confused, I'm not really a tech guy and I just don't know what to do, I'll try to click the Menu & Auto button on the screen but nothing happens (no they're not broken...
This laptop came out of the box yesterday and I plugged an external monitor into the VGA port to extend my desktop. The monitor has a message saying "Input Signal Out of Range Change setting to 1600x900 - 60HZ" The screen resolution on the extended desktop is already set to 1...
Input signal ranges of 0 mV to 20 mV through 0 V to 2.5 V can be accommodated on both low level input channels when operating with a VDD of 5 V and a reference of 2.5 V. They can also handle bipolar input signal ranges of ±20 mV through ±2.5 V, which are referenced to the L...