把initrd.img改名为gz后,用gunzip解压得到initrd文件,然后mount -o loop initrd /mnt 提示:mount: you must specify the filesystem type 尝试ext2,ext3都无效,用file命令发现原来是cpio格式的。 initrd: ASCII cpio archive (SVR4 with no CRC) 用cpio解压方法如下:cpio -id < ./initrd 这样就可以正常解压...
只要你的内核将某个文件格式直接编译进了kernel image,你就能用这种格式来做initrd。 3.1 制作一个空的initrd sudo dd if=/dev/zero of=initrd_64le.ext4 bs=1M count=30 sudo mkfs.ext4 initrd_64le.ext4 这样,就得到了一个30MB大小的、空的initrd。 3.2 mount新建的initrd mkdir /mnt mount initrd_64le...
cpio -idcvm < /tmp/initrd 这样子,不需要挂载cpio类型的文件。
mount:挂在命令. mount [-t vfstype] [-o options] device dir 1.-t vfstype 指定文件系统的类型,通常不必指定。mount 会自动选择正确的类型。 2.-o options 主要用来描述设备或档案的挂接方式。常用的参数有: loop:用来把一个文件当成硬盘分区挂接上系统 ...
装载映像 进入gimagex目录管理员权限打开gimagex_x64.exe 将之前创建的mount目录下的boot和install分别对应iso里面的boot和install 选择好后点击装载即可,装载成功后下面就会出现响应的数据 制作iso 用管理员权限打开win10builder目录下的WinBuilder.exe 点击右边的source列名,在source directory选择刚刚挂载的ios ...
mount -n -o move /dev/ /new_root/dev/ mount -n -o move /tmp/ /new_root/tmp/ mount -n -o move /run/ /new_root/run/ # 切换根文件系统 exec switch_root /new_root/ /sbin/init “` 注意,上面示例中的应该替换为你当前系统中使用的内核版本号。
The only purpose of it: mount the root filesystem The basic initramfs is the root filesystem image , (所以是a complete set of directories)used for booting the kernel provided as a compressed cpio archive At boot time, the kernel unpacks/即uncompressed that archive into RAM disk, mounts and...
2. mount ram0 作为 / 文件系统(可能是内核支持的ext2),这样做的目的是为了读取 initrd 中的内容. 3.initrd 文件系统一般有一个 /linuxrc 的文件,一般是一个 sh 脚本, kernel 执行之 --- 以下的步骤可能是脚本中指令,这个我没有仔细再研究过
它假设真正的根设备是一个块设备而且也假设了自己不是真正的根设备 initrd与initramfs的区别 boot loader装入kernel, 然后kernel需要执行/sbin/init, 读取 这个文件就必须先mount根文件系统, 早期是通过启动时的root= 参数告诉内核根文件系统在哪个设备上, 随着硬件和技术的发展, 现在根文件系统可能位于一个网络存储如...