# 将接口VLANIF 1的IP地址作为日志消息报文的源地址。 <HUAWEI>system-view[HUAWEI]info-center loghost source vlanif 1
Prerequisites There is a reachable route between the source interface and the log host. Example # Specify VLANIF 1 IP address as the source interface address to send information to a log host. <HUAWEI> system-view [HUAWEI] info-center loghost source vlanif 1Translation...
从vlan接口103（发送源为本机接口vlanif103） 发送给10.11.156.59（日志信息服务器）日志信息。意译，这应该是条配置命令。
info-center channel name info-center enable info-center filter-id info-center logbuffer info-center logbuffer size info-center logfile path info-center logfile size info-center loghost info-center loghost source info-center max-logfile-number info-center rate-limit except info-center rate-limit glo...
命令info-center loghost source loopback0的意图是设置日志主机(loghost)的源地址为loopback0接口。然而,根据华为的常规配置命令,info-center下可能没有直接支持source子命令来指定日志主机的源地址。通常,日志的源地址(如IP地址)是直接通过其他方式配置在设备上,如接口配置或全局配置中。 3. 错误消息分析 error: wro...
Prerequisites There is a reachable route between the source interface and the log host. Example # Specify VLANIF 1 IP address as the source interface address to send information to a log host. <HUAWEI> system-view [HUAWEI] info-center loghost source vlanif 1П...
info-center loghost source 命令功能 info-center loghost source命令用来配置设备向日志主机发送消息的源接口信息。 undo info-center loghost source命令用来恢复设备向日志主机发送消息的源接口信息为缺省值。 缺省情况下,设备向日志主机发送信息的源接口就是实际发送信息的接口。