Read up in the manual (first link below). You can also search for those commands as well (use the second link below) and compare the difference. I had to turn igmp snooping and such off to get Homekit to work over my icx7150. RUCKUS FastIron IP Multicast Configur...
Brocade firmware Question: 7250 and 7150 currently on 8080 - if i wish to go to 8092; can I upgrade from 8080 to 8092 -or- must I upgrade to 8090 and then 8092 ? thanks I just jumped from 8080 to 8092 without issues Reactions: tommybackeast M mrizzo New Memb...
There is no hint of any physical damage on console or management ports, the console cable I used is known to be good and it works with the my ICX7150-C12P that I also have. I've also opened up the switch to visually check the console port area, nothing seems o...
SSH connections (inbound): 1 established, client ip address 192.168.1.50, server hostkey RSA, user is USER, privilege super-user, in config mode using vrf default-vrf. you are connecting to this session 10 second(s) in idle ^^^ That particular SSH session is to the...
I'd successfully run the process on a 7150-C12P and three 6450's, but running into a unique issue with this 6610. I've done everything, including specifically entering username evan password mypasswordstring, followed by write mem, and even did a reload. However when I...
I did not do VE's on all vlans as I did not want a user on Vlan 40 to be able to access the brocade management console via telnet, ssh, web, etc. Thanks for the help! Rich Click to expand... Following kpfleming's post, here's a basic L3 config I mocked...