#include<LiquidCrystal_I2C.h>LiquidCrystal_I2Clcd(0x3F,16,2);// set the LCD address to 0x3F for a 16 chars and 2 line displayvoidsetup(){lcd.init();lcd.clear();lcd.backlight();// Make sure backlight is on// Print a message on both lines of the LCD.lcd.setCursor(2,0)...
添加“液晶显示器(LCD)-I2C”组件 选择“LiquidCrystalDisplay1”并在属性窗口中将行设置为 4,列设置为 20 双击“LiquidCrystalDisplay1”并在元素窗口中将“文本字段”拖到左侧,然后在属性窗口中将文本设置为“HELLO WORLD”,宽度设置为 20 关闭元素窗口 将“LiquidCrystalDisplay1”引脚 I2C 输出连接到 Arduino I2C ...
将“DetectEdge1”引脚 [Out] 连接到“LiquidCrystalDisplay1”引脚 [Clear]第7 步:生成、编译和上传代码在Visuino 中,点击底部的“ Build ”选项卡,确保选择了正确的端口,然后点击“ Compile/Build and Upload ”按钮。第8 步:播放如果为 Arduino 模块供电,LCD 将开始闪烁文本。
Display Description: 16*2 Communication Mode: I2C Backlight: Blue Operating Temperature: -20 to +70°C Storage Temperature: -30 to +80°C Dimension: 87.0*32.0*13.0mm/3.43*1.26*0.51in Documents Product wiki More Documents Shipping List Gravity: I2C LCD1602 Arduino LCD Display Module (Blue) x1...
display.setCursor 四、示例代码 1. 显示简单的图形和文本 2. 显示一段简单的动画 3. 一个圆随机移动的效果 一、准备工具 arduino UNO JMD0.96C-1 OLED显示屏模块 二、JMD0.96C-1介绍 1. 显示屏参数 本次试验采用的OLED屏是使用I2C接口通讯的0.96寸屏,采用 SSD1306 驱动,有4个引脚。单色, 128x64像素。
// initialize the library with the numbers of the interface pins LiquidCrystal_I2C lcd(0x27,16,2); // set the LCD address to 0x27 0x3F for a 16 chars and 2 line display /***/ void setup() { lcd.init(); //initialize the lcd lcd.backlight(); //open the...
Use this component to control Text Liquid Crystal Display with I2C interface. Resources: Instructable: Arduino Nano: I2C 2 X 16 LCD Display With Visuino Instructable: Arduino Nano: DHT11 Temperature an Humidity I2C 2 X 16 LCD Display With Visuino ...
lcd.setBacklight(HIGH);//Backlight on} 供电和耗电测试 硬件是Arduino NANO + 扩展板 + PCF8574T + 1602LCD, 使用输入电压12V. 扩展板本身不带IC, 只有一个电源LED, 功耗可以忽略. 在使用自带的LiquidCrystal_I2C库跑上面的测试代码时, 测得的功耗仅为0.95W左右....
IIC/I2C2004 LCD2004 液晶屏模块 蓝屏 提供库文件适用于Arduino 深圳市佳明丰电子经营部15年 月均发货速度:暂无记录 广东 深圳市 ¥6.10成交4件 0.69寸OLED显示屏9616液晶屏显串口屏iic接口屏i2cssd1306 深圳市发明家电子科技有限公司3年 月均发货速度:暂无记录 ...
// Arduino reset pin, specify -1 as below #define OLED_RESET -1 // Define the OLED display, width,hight protocol and reset pin Adafruit_SSD1306 oled(OLED_WIDTH,OLED_HEIGHT, &Wire, OLED_RESET); // Define the I2C LCD screen address and pin configuration LiquidCrystal_I2C lcd(0x27,2,1...