那么driver_data为1表示”twl4030“,driver_data为2表示”twl5030“等等。。 回到i2c_device_id twl_ids的原始定义,driver_data应该怎么用呢?很简单,看一下代码。 staticint__init twl_probe(structi2c_client *client,conststructi2c_device_id *id) { intstatus; unsigned i; structtwl4030_platform_data *p...
2、在另外一个设备驱动文件里,比如你放到/driver/char下做字符设备,一般是module_init(func_init())形式,则调用i2c_add_driver()即可,有几个要定义: static const struct i2c_device_id xxx_led_id[] = { { "abcd1", 0 }, /* 该名称必须与BOARD_INFO的匹配才会调用probe函数 */ { "abcd2", 0 }...
DeviceSelectionPolarity WireMode SlaveMode ResourceSource 以下字段是用户在运行时指定的值的占位符: DataBitLength ConnectionSpeed ClockPolarity ClockPhase 由于SPI1 仅包含单个芯片选择行,因此声明单个 SPISerialBus() 资源: C++ 复制 // Index 2 SPISerialBus( // SCKL - GPIO 21 - Pin 40 // MOSI -...
I2C driver I2Ccore I2C algorithm I2C adapter 硬件层 I2C device 本文参考 I2C驱动框架简介 I2C 驱动属于总线-设备-驱动模型的,与I2C总线设备驱动模型相比,大体框架是一样,系统的整体框架如下所示。 最上层是应用层,在应用层用户可以直接用open read write对设备进行操作, 往下是设备驱动层,这个就是外围的比如一些...
根据前面的总线设备驱动的框架,有driver那么肯定会有device。这两者的匹配靠的是.id_table 对于gc0308,具体可以通过kernel/arch/mips/xburst/soc-x1000/chip-x1000/halley2/common/i2c_bus.c 可以看到向I2C总线注册的device的是gc0308 如果匹配上了,则调用driver的.probe函数。下面我们来看一下该函数具体做了什么...
unsigned int data); int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); struct device_driver driver; //设备驱动结构体 const struct i2c_device_id *id_table; //设备名称,用来匹配设备与驱动 int (*detect)(struct i2c_client *client, struct i2c_board_info *info); ...
unsigned int data); /* a ioctl like command that can be used to perform specific functions * with the device. */ int (*command)(struct i2c_client *client, unsigned int cmd, void *arg); struct device_driver driver; const struct i2c_device_id *id_table; ...
(struct i2c_client*,enumi2c_alert_protocol protocol,unsigned int data);int(*command)(struct i2c_client*client,unsigned int cmd,void*arg);struct device_driver driver;conststruct i2c_device_id*id_table;int(*detect)(struct i2c_client*,struct i2c_board_info*);constunsigned short*address_list;...
void(*alert)(structi2c_client*,unsignedintdata); /*aioctllikecommandthatcanbeusedtoperformspecificfunctions *withthedevice. */ int(*command)(structi2c_client*client,unsignedintcmd,void*arg); structdevice_driverdriver; conststructi2c_device_id*id_table; ...