Device type: Human Interface Device Manufacturer: Microsoft Location: on Intel(R) Serial IO I2C Host Controller - A0E9 Device Status: This device cannot start. (Code 10) A request for the HID descriptor failed.
Device Manager Code 10 error from Microsoft Support: Full Error Message "This device cannot start. Try upgrading the device drivers for this device. (Code 10)" Cause Typically, the device's hardware key contains a "FailReasonString" value, and the value string is displays an error message de...
Re:I2C HID Device - Touchpad not working I tried that things but nothing correct my problem. This device cannot start. (Code 10) A request for the HID descriptor failed. Thankyou for help me Quick replyReply0 stepapFanfold Paper 90 Posts: 23 Registered: 2021-03-14...
Intel(R) Serial IO I2C Host Controller - A160 "This device cannot start. (Code 10) STATUS_DEVICE_POWER_FAILURE" TPS65988 Device Driver
This device cannot start. (Code 10) HID descriptor request failed. Class GUID: {745a17a0-74d3-11d0-b6fe-00a0c90f57da} The tablet function no longer appears in the control panel. The function to generate the screen still appears, but obvious attempts to enable and disable it donot s...
Fix: "This device cannot start" Code 10 error in Device Manager in Windows https://support.microsoft.com/en-us/kb/943104 And since this is windows server forum, we mainly focus on branch office setting in windows server. For more professional support about windows 10, I suggest you may ...
I have traced this issue to the I2C driver having a (This device cannot start. (Code 10)A request for the HID descriptor failed). I2C HID Device version: 10.0.22621.2506 Driver date:21/06/2006 I have uninstalled the driver countless times and tried reinstalling different ones to no avail...
19-4566; Rev 1; 8/10 可提供评估板 I2C接口按键开关控制器和LED 驱动器/GPIO,集成ESD保护电路 概述 MAX7360 I2C接口外设能 够为微 处 理器管 理 多达64个 按键开关, 附加的 8路LED驱 动器/GPIO具 有固定电 流, PWM亮度调节及旋转开关控制选项. 按键开关驱动器能够与金属开关或导通电阻高达5kΩ的阻性...
1 = I2CxADD 为 10 位从器件地址 0 = I2CxADD 为 7 位从器件地址 bit 9 DISSLW ：压摆率控制...
I have some problems to get I2C running on my device.I am using XMC4300 and digilent TMP3 sensor via I2C.After reading all articles and examples, i am confused if i shall use I2C or XMC i2c lib?Code in Main: XMC_I2C_CH_Init(i2c, &i2c_cfg); XMC_I2C_CH_SetInputSource(i2c, XMC_...