This aircraft is a simple 3-channel airplane, so you're only going to need the bare essentials of RC components. Locate 2x 5g servos and center them with a servo tester. Grab a receiver, motor, and ESC and make sure that the motor is spinning the right way when powered by a small...
The theory behind this project is to use PPM signals which will be generated by the Arduino to control the drone. The Flight Controller usually receives PPM signals from the receiver which receives data from the transmitter. If we can generate the same PPM signals that the receiver sends to t...
Touch-free testing: how wafer tester Andrews NDT gets precision motion using motionless feedback to close the servo loop.(Andrew NDT Engineering )(Cover Story)Costlow, Terry
There is a dedicated thread for the bricks: https://www.rcgroups.com/forums/show...1636399&page=1 It should be possible to use the two servo sockets to drive a servo switch module. Otherwise the HK-5320 servos will plug in here. Here are cheap ...