Step 8. After the firmware update has done compiling, you will now simply connect your 3D printer with the computer using a USB connection if your printer has a bootloader. If not, there’s also a way to connect your printer and I’ve talked about it later on in the article. Once con...
Firmware Update your camera if you can(It is not required.) Step 8: Open up device manager and ensure all Imaging devices are underneath the Imaging Device Class. You should see the following: Open up the Properties on the Depth Sens...
If bit 31 of the register is not set, you can update the register with a different value. If you set bits 7:0 to a value greater than or equal to the maximum Turbo ratio (29 decimal on your processor), then the proce...