then anchor it with a couple of staples. I have not found that to be necessary, however. I drive another staple slightly around the post from the first and run one end of the wire through it. Drive the staple in tightly then bend the wire back on ...
If you want to measure and cut extra conduit you can connect the triangles, but we are just using this to connect to a wood door frame, and are going to wrap welded wire fence over the wood, we elected to leave the triangles “loose”. Frame in the door using traditional carpentry tec...
Pro tip: Attach the gate fittings to the gate posts loosely so that you can get the gate into the right position. Tighten the fittings when the gate is horizontal and the latches meet properly. Step 10 - How to Install Chain Link Fence on Concrete ...
A vice will work to hold it in place if you have access to one, just don't overtighten it and crack the PVC. Make slow, smooth strokes with the saw. This will prevent chipping on the end of the pipe. As the pros say “Let the saw do the work.” 2. Remove the Burrs! When ...
Note: 1. Due to the high density of wood-plastic material itself, it is necessary to use the drill hole at the position of the self-tapping screw, and then tighten the self-tapping screw Drill a hole–wood plastic composite installation guide ...