The kick down cable is mounted to the carburetor, or, in the case of fuel injected vehicles,the throttle body. It runs from the butterfly arm on the carburetor down to the side of the transmission, where it attaches to an arm that allows the transmission to shift gears. This is required...
Attach a pinchbolt to the end of the cable in the headset once you pull it snug, removing any slack. Use a screwdriver to tighten the pinchbolt on the cable. Insert the cable and pinchbolt into the groove in the pulley on the throttle handle. Redo the process if it is not tight. C...
A higher thrust-to-weight ratio gives a quadcopter greater agility and acceleration but can make it more challenging to control, especially for beginners. Even the slightest throttle touch can “shoot the quad into orbit like a rocket.” Piloting skill and experience play a significant role in m...
Ride your bicycle at a comfortable pace. Place your right hand on the grip-shift located at the end of your right grip. Click the shifter in the direction you desire as if you are moving the throttle of a motorcycle. To shift up into a harder gear, click the shifter away from you. ...
This does not indicate the direction the motor spins. Brushless motors can spin either direction. This label differentiates the direction that the motor bolt is threaded. This is done so that as the motor spins, the torque from the propeller pushes the motor nut to tighten rather than loosen....
Vehicles clutch levers provide considerable mechanical advantage to the rider. Mounted on the left side of the handlebars, it is positioned to be used by the left hand, leaving the right hand free to control the throttle and the front brakes. Several clu