You can set your Deco as a 3G/4G or 4G/5G router or a wireless router to meet the needs of different network scenarios. Here we take Deco X80-5G for example. Note: Features available in Deco may vary by model and software version. All steps and images described here are only examples...
When a 3G/4G or 4G/5G Deco works in Wireless Router mode, you can use the 3G/4G or 4G/5 G network as a backup solution for internet access. When 3G/4G or 4G/5G Backup is enabled, your Deco will be directly connected to the 3G/4G or 4G/5G network when the WAN connection fails...
1. Connect a mobile device to the Deco router. 2. Open the Deco app. 3. Tap the Settings icon at the bottom right corner, then tap Advanced. 4. Tap Working Mode, then choose Access Point mode 5. The app will indicate to reboot the router, tap OK. 6. Wait for about 2 minutes ...
TP-Link Deco Mesh Wi-Fi System If you want to cover an enormous area with stable Wi-Fi, then this mesh kit is the perfect solution. It can cover up to 5,500 square feet and you don’t need separate login details for each router. It connects up to ...
On the other hand, with a wired backhauling, all you need is a modest dual-band Wi-Fi 6 or tri-band Wi-Fi 6E system—such as theAsus ZenWiFi XD5or, better yet theTP-Link Deco X55 Pro—to experience Gigabit-class bandwidth.
Update (october 2021): If you have a large house or lot of walls then you can go with this Wifi set (so-called Mesh WiFi) calledTp-Link Deco. Basically, this is two or more routers that work together. It merges into a single wifi network and has a good parent con...
TP-Link Deco M9 Plus Designed for homes and office buildings up to 6,500 square feet, theTP-Link Deco M9 Plusis an advanced tri-band mesh WiFi system that can do almost everything you could possibly want it to do. It sells in a pack of three units. When connected, the three units...
Please refer to this link:https://www.tp-link.com/support/faq/3481/ 3. SelectPPTP, enter the necessary information and save the settings. Description:Enter a name for this VPN. Client IP Address:Enter the range of IP addresses (up to 10) that can be leased to the devices by the L2TP...
1. Visithttp://tplinkwifi.net, and log in with your TP-Link ID or the password you set for the router. 2. Go toAdvanced>Security>Device Isolationand enableDevice Isolation. 3. Click+ Addto add the devices that you would like to be isolated from your main network. ...
1. Always keep the Deco’s firmware up-to-date to use AP mode. If you’re not sure, please open the Deco app, and tap More->System->Update Deco for a check. 2. Please make sure you have installed the latest Deco app to use AP mode. ...