(a3) Enable UPnP: UPnP(Universal Plug and Play) allows several devices(routers, televisions, stereo systems, game consoles, cellular phone) to be controlled via an IP-based network with or without a central control through a gateway.
Step 4: Connect gateway to router First, turn off the gateway. If there is already an Ethernet cable plugged into the gateway's local-area network (LAN) port, unplug the cable and plug it into your router's WAN port. Turn the gateway back on and wait a few minutes for it to boot ...
How to Test the Wi-Fi Speed A broadband network is an extremely complex end-to-end system, which consists of the client, access network, core network, and content resources. The client refers to the network set up between STAs and wireless routers. Devices on the access and core ne...
"I set up a switch, but I want to be able to access it; however, I can't access it via Telnet or HTTPS. I believe the problem is that I did not set up the username. Is there any way to access it remotely? I am attaching the main setup. enable secret 9 $9$KkMgIVNmfnRs5E...
switch(Config-if)#ip address 192.168.20.2 255.255.255.0 switch(Config-if)#no shut switch(Config-if)#exit switch(Config)#ip default-gateway 192.168.10.1 On router === Router(config)#ip dhcp excluded-address 192.168.10.1 192.168.10.2 Router(config)#ip dhcp excluded-address 192.168....
to remotely administer the layer 2 switch, first set a hostname and enable secret, then configure telnet or ssh in the vty line: Switch(config)#hostname L2_Sw L2_Sw(config)#enable secret cisco L2_Sw(config)#line vty 0 15 L2_Sw(config-line)#password cisco L2_Sw(conf...
This post will deal with creating Layer 2 VLANs on Cisco switches and performing all relevant configurations. Up to 4094 VLANs can be configured on Cisco catalyst switches. By default, only VLAN 1 is configured on the switch, so if you connect hosts on a
The switch provides the local attack defense function to protect the CPU. Local attack defense policies include attack source tracing, port attack defense, CPCAR, and blacklist. Create a local attack defense policy based on attack source tracing. Create an ACL and add the gateway IP address to...
First, make sure you have performed basic network configurations on your switch. For example, assign default gateway, assign management ip-address, etc. If this is already done, skip to the next step. In the following example, the management ip address is set as 192.168.101.2 in the 101 VL...
! define a dns name to assign to clients Router(dhcp-config)#domain-name mycompany.com ! define a default gateway for the clients Router(dhcp-config)#default-router 192.168.1.1 ! define the dns server for the clients Router(dhcp-config)#dns-server 100.100.100.1 ...